lkml.org 
[lkml]   [2018]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.14 007/101] iio: st_pressure: st_accel: pass correct platform data to init
Date
4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Nosthoff <committed@heine.so>

commit 8b438686a001db64c21782d04ef68111e53c45d9 upstream.

Commit 7383d44b added a pointer pdata which get set to the default
platform_data when non was defined in the device. But it did not
pass this pointer to the st_sensors_init_sensor call but still
used the maybe uninitialized platform_data from dev.

This breaks initialization when no platform_data is given and
the optional st,drdy-int-pin devicetree option is not set.

This commit fixes this.

Cc: stable@vger.kernel.org
Fixes: 7383d44b ("iio: st_pressure: st_accel: Initialise sensor platform data properly")
Signed-off-by: Michael Nosthoff <committed@heine.so>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/iio/accel/st_accel_core.c | 2 +-
drivers/iio/pressure/st_pressure_core.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -794,7 +794,7 @@ int st_accel_common_probe(struct iio_dev
if (!pdata)
pdata = (struct st_sensors_platform_data *)&default_accel_pdata;

- err = st_sensors_init_sensor(indio_dev, adata->dev->platform_data);
+ err = st_sensors_init_sensor(indio_dev, pdata);
if (err < 0)
goto st_accel_power_off;

--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -617,7 +617,7 @@ int st_press_common_probe(struct iio_dev
if (!pdata && press_data->sensor_settings->drdy_irq.addr)
pdata = (struct st_sensors_platform_data *)&default_press_pdata;

- err = st_sensors_init_sensor(indio_dev, press_data->dev->platform_data);
+ err = st_sensors_init_sensor(indio_dev, pdata);
if (err < 0)
goto st_press_power_off;


\
 
 \ /
  Last update: 2018-03-27 19:38    [W:0.573 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site