lkml.org 
[lkml]   [2018]   [Mar]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: linux-next on x60: network manager often complains "network is disabled" after resume
From
Date
On Sun, 2018-03-25 at 08:19 +0200, Pavel Machek wrote:
> > > > Ok, what does 'nmcli dev' and 'nmcli radio' show?
> > >
> > > Broken state.
> > >
> > > pavel@amd:~$ nmcli dev
> > > DEVICE TYPE STATE CONNECTION
> > > eth1 ethernet unavailable --
> > > lo loopback unmanaged --
> > > wlan0 wifi unmanaged --
> >
> > If the state is "unmanaged" on resume, that would indicate a
> > problem
> > with sleep/wake and likely not a kernel network device issue.
> >
> > We should probably move this discussion to the NM lists to debug
> > further. Before you suspend, run "nmcli gen log level trace" to
> > turn
> > on full debug logging, then reproduce the issue, and send a pointer
> > to
> > those logs (scrubbed for anything you consider sensitive) to the NM
> > mailing list.
>
> Hmm :-)
>
> root@amd:/data/pavel# nmcli gen log level trace
> Error: Unknown log level 'trace'

What NM version? 'trace' is pretty old (since 1.0 from December 2014)
so unless you're using a really, really old version of Debian I'd
expect you'd have it. Anyway, debug would do.

> root@amd:/data/pavel# nmcli gen log level help
> Error: Unknown log level 'help'

nmcli gen help

> root@amd:/data/pavel# nmcli gen log level
> Error: value for 'level' argument is required.
> root@amd:/data/pavel# nmcli gen log level debug

This should be OK.

> root@amd:/data/pavel# cat /var/log/sys/log

It routes it to whatever the syslog 'daemon' facility logs to (however
that's configured on your system). Usually /var/log/messages or
/var/log/daemon.log or sometimes your distro configures it to
/var/log/NetworkManager.log.

Or if you're using a systemd-based distro, it would probably be in the
systemd journal so "journalctl -b -u NetworkManager"

> Where do I get the logs? I don't see much in the syslog...

> And.. It seems that it is "every other suspend". One resume results
> in
> broken network, one in working one, one in broken one...

Does your distro use pm-utils, upower, or systemd for suspend/resume
handling?

Dan

\
 
 \ /
  Last update: 2018-03-26 17:34    [W:0.083 / U:0.812 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site