lkml.org 
[lkml]   [2018]   [Mar]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 1/5] pwm-backlight: enable/disable the PWM before/after LCD enable toggle.
On Mon 2018-03-26 11:52:09, Enric Balletbo i Serra wrote:
> Before this patch the enable signal was set before the PWM signal and
> vice-versa on power off. This sequence is wrong, at least, it is on
> the different panels datasheets that I checked, so I inverted the sequence
> to follow the specs.
>
> For reference the following panels have the mentioned sequence:
> - N133HSE-EA1 (Innolux)
> - N116BGE (Innolux)
> - N156BGE-L21 (Innolux)
> - B101EAN0 (Auo)
> - B101AW03 (Auo)
> - LTN101NT05 (Samsung)
> - CLAA101WA01A (Chunghwa)

Ok, but this changes behaviour for other panels, too. Are you sure you
are not breaking one of those?
Pavel

--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-03-26 12:43    [W:0.185 / U:1.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site