lkml.org 
[lkml]   [2018]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/3] iio: add unit converter
From
Date
On 2018-03-23 14:14, Jonathan Cameron wrote:
> On Mon, 19 Mar 2018 18:02:43 +0100
> Peter Rosin <peda@axentia.se> wrote:
>
>> Hi!
>>
>> This moves the iio-mux driver to a new category, since I think
>> it will be the single driver in that category forever, and now
>> I'm adding a new driver that is somewhat similar in nature...
>>
>> But that rename is not very interesting, it's just reshuffling.
>> It's the new driver that I need. Specifically, I need to allow
>> linear scaling and modification of the type of an io-channel.
>> I don't know exactly how that is accomplished in the best way,
>> but this is what I came up with.
>>
>> The use cases are an ADC hooked up to measure a "big" voltage by
>> looking at the midpoint of a voltage divider, and an ADC used
>> to measure the current by looking at the voltage over a resistor.
>>
>> Comments?
> It is pretty much how I would have implemented it as well.
>
> Will probably do a detailed review over the weekend.
> Not convinced entirely on the 'wrapper' naming though.
> Will think about it...

Yeah, let's put 'Wrapper' in the crapper. Not married to it.

Miscellaneous?

So, not super-happy about that either. And maybe leave the mux
where it is? It's just that I have the feeling that the iio-mux
is never going to get any friends in its category, and the mux
and the unit-converter are kind of related in that they operate
on other channels. But maybe that's only logical it you know how
they are implemented...

Cheers,
Peter

>
> Jonathan
>
>>
>> Cheers,
>> Peter
>>
>> Peter Rosin (3):
>> iio: rename the multiplexer category to wrapper
>> dt-bindings: iio: wrapper: add io-channel-unit-converter
>> iio: wrapper: unit-converter: new driver
>>
>> .../{multiplexer => wrapper}/io-channel-mux.txt | 0
>> .../iio/wrapper/io-channel-unit-converter.txt | 84 +++++++
>> MAINTAINERS | 11 +-
>> drivers/iio/Kconfig | 2 +-
>> drivers/iio/Makefile | 2 +-
>> drivers/iio/multiplexer/Makefile | 6 -
>> drivers/iio/{multiplexer => wrapper}/Kconfig | 13 +-
>> drivers/iio/wrapper/Makefile | 7 +
>> drivers/iio/{multiplexer => wrapper}/iio-mux.c | 0
>> drivers/iio/wrapper/iio-unit-converter.c | 268 +++++++++++++++++++++
>> 10 files changed, 381 insertions(+), 12 deletions(-)
>> rename Documentation/devicetree/bindings/iio/{multiplexer => wrapper}/io-channel-mux.txt (100%)
>> create mode 100644 Documentation/devicetree/bindings/iio/wrapper/io-channel-unit-converter.txt
>> delete mode 100644 drivers/iio/multiplexer/Makefile
>> rename drivers/iio/{multiplexer => wrapper}/Kconfig (53%)
>> create mode 100644 drivers/iio/wrapper/Makefile
>> rename drivers/iio/{multiplexer => wrapper}/iio-mux.c (100%)
>> create mode 100644 drivers/iio/wrapper/iio-unit-converter.c
>>
>

\
 
 \ /
  Last update: 2018-03-23 15:00    [W:0.147 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site