lkml.org 
[lkml]   [2018]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v5 08/13] ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data
    Date
    Add the common data for all dk07 based boards.

    Reviewed-by: Abhishek Sahu <absahu@codeaurora.org>
    Signed-off-by: Sricharan R <sricharan@codeaurora.org>
    ---
    arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi | 69 +++++++++++++++++++++++++++
    1 file changed, 69 insertions(+)
    create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi

    diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
    new file mode 100644
    index 0000000..4cc519f
    --- /dev/null
    +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
    @@ -0,0 +1,69 @@
    +// SPDX-License-Identifier: GPL-2.0
    +// Copyright (c) 2018, The Linux Foundation. All rights reserved.
    +
    +#include "qcom-ipq4019.dtsi"
    +#include <dt-bindings/input/input.h>
    +#include <dt-bindings/gpio/gpio.h>
    +
    +/ {
    + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1";
    + compatible = "qcom,ipq4019";
    +
    + memory {
    + device_type = "memory";
    + reg = <0x80000000 0x20000000>; /* 512MB */
    + };
    +
    + aliases {
    + serial0 = &blsp1_uart1;
    + serial1 = &blsp1_uart2;
    + };
    +
    + chosen {
    + stdout-path = "serial0:115200n8";
    + };
    +
    + soc {
    + pinctrl@1000000 {
    + serial_0_pins: serial0_pinmux {
    + mux {
    + pins = "gpio16", "gpio17";
    + function = "blsp_uart0";
    + bias-disable;
    + };
    + };
    +
    + i2c_0_pins: i2c_0_pinmux {
    + mux {
    + pins = "gpio20", "gpio21";
    + function = "blsp_i2c0";
    + bias-disable;
    + };
    + };
    + };
    +
    + serial@78af000 {
    + pinctrl-0 = <&serial_0_pins>;
    + pinctrl-names = "default";
    + status = "ok";
    + };
    +
    + dma@7884000 {
    + status = "ok";
    + };
    +
    + i2c@78b7000 { /* BLSP1 QUP2 */
    + pinctrl-0 = <&i2c_0_pins>;
    + pinctrl-names = "default";
    + status = "ok";
    + };
    +
    + dma@7984000 {
    + status = "ok";
    + };
    +
    + qpic-nand@79b0000 {
    + status = "ok";
    + };
    + };
    +};
    --
    QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
    \
     
     \ /
      Last update: 2018-03-23 11:24    [W:3.449 / U:0.632 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site