lkml.org 
[lkml]   [2018]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/2] fpga: lattice machxo2: Add Lattice MachXO2 support
On Wed, Mar 21, 2018 at 1:04 PM, Joe Perches <joe@perches.com> wrote:
> On Wed, 2018-03-21 at 18:35 +0100, Paolo Pisati wrote:
>> This patch adds support to the FPGA manager for programming
>> MachXO2 device’s internal flash memory, via slave SPI.
>
> style trivia:
>
>> diff --git a/drivers/fpga/machxo2-spi.c b/drivers/fpga/machxo2-spi.c
> []
>> +static int get_status(struct spi_device *spi, unsigned long *status)
>> +{
>> + struct spi_message msg;
>> + struct spi_transfer rx, tx;
>> + u8 cmd[] = LSC_READ_STATUS;
>
> static const u8 cmd[]
> here and everywhere else as all the tx_buf assignments
> of cmd are to const void *

Why *static* const u8 cmd[]?

Alan

>
>> + int ret;
>> +
>> + memset(&rx, 0, sizeof(rx));
>> + memset(&tx, 0, sizeof(tx));
>> + tx.tx_buf = cmd;
>
> []
>
>> +#ifdef DEBUG
>> +static void dump_status_reg(unsigned long *status)
>> +{
>
> Instead of multiple declarations of dump_status_reg
> it's frequently nicer to use a style like
>
> static void debug_func(args...)
> {
> #ifdef DEBUG
> [code...]
> #endif
> }
>
> so if function arguments ever need to be changed
> it's only required to be changed in one spot and
> not multiply compilation tested with and without
> the DEBUG definition
>
>> + char *ferr;
>> +
>> + switch (get_err(status)) {
>> + case ENOERR:
>> + ferr = "No Error";
>> + break;
>> + case EID:
>> + ferr = "ID ERR";
>> + break;
>> + case ECMD:
>> + ferr = "CMD ERR";
>> + break;
>> + case ECRC:
>> + ferr = "CRC ERR";
>> + break;
>> + case EPREAM:
>> + ferr = "Preamble ERR";
>> + break;
>> + case EABRT:
>> + ferr = "Abort ERR";
>> + break;
>> + case EOVERFL:
>> + ferr = "Overflow ERR";
>> + break;
>> + case ESDMEOF:
>> + ferr = "SDM EOF";
>> + break;
>> + default:
>> + ferr = "Default switch case";
>> + }
>
> It's frequently nicer to use a static function
> for these enum -> string conversions like:
>
> static const char *get_err_string(unsigned long err)
> {
> switch (err) {
> case ENOERR: return "No Error";
> case EID: return "ID ERR";
> case ECMD: return "CMD ERR";
> [...]
> }
> return "default switch case";
> }
>
>> + pr_debug("machxo2 status: 0x%08lX - done=%d, cfgena=%d, busy=%d, fail=%d, devver=%d, err=%s\n",
>> + *status, test_bit(DONE, status), test_bit(ENAB, status),
>> + test_bit(BUSY, status), test_bit(FAIL, status),
>> + test_bit(DVER, status), ferr);
>
> So instead of ferr, this could use
> get_err_string(*status)
>
> And please try to keep a consistent alignment for
> indentation of multiple line statements
>
>> +}
>> +#else
>> +static void dump_status_reg(unsigned long *status) {}
>> +#endif
>> +
>> +static int wait_until_not_busy(struct spi_device *spi)
>> +{
>> + unsigned long status;
>> + int ret, loop = 0;
>> +
>> + do {
>> + ret = get_status(spi, &status);
>> + if (ret)
>> + break;
>> + if (++loop >= MACHXO2_MAX_BUSY_LOOP) {
>> + ret = -EBUSY;
>> + break;
>> + }
>> + } while (test_bit(BUSY, &status));
>> +
>> + return ret;
>> +}
>
> Direct returns are OK and would shorten the function
> line count.
>

\
 
 \ /
  Last update: 2018-03-22 22:34    [W:0.127 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site