lkml.org 
[lkml]   [2018]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH 1/5] net: macb: Check MDIO state before read/write and use timeouts
On Thu, Mar 22, 2018 at 07:21:36PM +0530, harinikatakamlinux@gmail.com wrote:
> From: Harini Katakam <harinik@xilinx.com>
>
> Replace the while loop in MDIO read/write functions with a timeout.
> In addition, add a check for MDIO bus busy before initiating a new
> operation as well to make sure there is no ongoing MDIO operation.
>
> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
> Signed-off-by: Harini Katakam <harinik@xilinx.com>
> ---
> drivers/net/ethernet/cadence/macb_main.c | 54 ++++++++++++++++++++++++++++++--
> 1 file changed, 52 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
> index d09bd43..f4030c1 100644
> --- a/drivers/net/ethernet/cadence/macb_main.c
> +++ b/drivers/net/ethernet/cadence/macb_main.c
> @@ -321,6 +321,21 @@ static int macb_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
> {
> struct macb *bp = bus->priv;
> int value;
> + ulong timeout;
> +
> + timeout = jiffies + msecs_to_jiffies(1000);
> + /* wait for end of transfer */
> + do {
> + if (MACB_BFEXT(IDLE, macb_readl(bp, NSR)))
> + break;
> +
> + cpu_relax();
> + } while (!time_after_eq(jiffies, timeout));
> +
> + if (time_after_eq(jiffies, timeout)) {
> + netdev_err(bp->dev, "wait for end of transfer timed out\n");
> + return -ETIMEDOUT;
> + }

Hi Harini

It looks like you have repeated the same code 4 times. Please move it
into a helper function.

Andrew

\
 
 \ /
  Last update: 2018-03-22 15:47    [W:0.156 / U:0.984 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site