lkml.org 
[lkml]   [2018]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH 0/8] ARM: davinci: complete the conversion to using the reset framework
    Date
    From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

    This series converts the only user of the handcoded, mach-specific reset
    routines in the davinci platform to using the reset framework.

    Patch 1 modifies the way lookup entries are registered with the reset
    framework.

    Patches 2-4 add necessary lookups/DT-properties.

    Patches 5-7 convert the davinci-rproc driver to the reset framework.

    Patch 8 removes now dead code.

    Philipp: it turned out that it's indeed better to use the reset
    controller's device name for the entry lookup.

    Tested both in DT and legacy modes by booting the examples from
    ti-ipc-rtos recipe in meta-ti.

    This series applies on top of David Lechner's common-clk-v9 branch[1]
    with Philipp Zabel's reset/next branch[2] pulled in.

    It can be found in my github tree as well[3].

    [1] git://github.com/dlech/ev3dev-kernel.git common-clk-v9
    [2] git://git.pengutronix.de/git/pza/linux reset/next
    [3] git@github.com:brgl/linux.git topic/davinci-reset

    Bartosz Golaszewski (8):
    reset: modify the way reset lookup works for board files
    ARM: davinci: dts: make psc0 a reset provider
    ARM: davinci: dts: add a reset control to the dsp node
    clk: davinci: add a reset lookup table for psc0
    remoteproc: da8xx: add the missing checke for clk_enable()
    remoteproc: da8xx: prepare and unprepare the clock where needed
    remoteproc: da8xx: use the reset framework
    clk: davinci: kill davinci_clk_reset_assert/deassert()

    arch/arm/boot/dts/da850.dtsi | 2 ++
    arch/arm/mach-davinci/include/mach/clock.h | 21 ----------------
    drivers/clk/davinci/psc-da850.c | 8 ++++++
    drivers/clk/davinci/psc.c | 19 +-------------
    drivers/remoteproc/da8xx_remoteproc.c | 40 ++++++++++++++++++++++++------
    drivers/reset/core.c | 33 +++++++++++++++++++++---
    include/linux/reset-controller.h | 8 +++---
    7 files changed, 78 insertions(+), 53 deletions(-)
    delete mode 100644 arch/arm/mach-davinci/include/mach/clock.h

    --
    2.16.1

    \
     
     \ /
      Last update: 2018-03-21 13:09    [W:4.550 / U:0.864 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site