lkml.org 
[lkml]   [2018]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 1/9] pwm: core: Add support for PWM HW driver with pwm capture only
Date
Add support for pwm HW driver which has only capture functionality.
This helps to implement the PWM based Tachometer driver which reads
the PWM output signals from electronic fans.

PWM Tachometer captures the period and duty cycle of the PWM signal

Add conditional checks for callabacks enable(), disable(), config()
to check if they are supported by the client driver or not. Skip these
callbacks if they are not supported.

Signed-off-by: Rajkumar Rampelli <rrajk@nvidia.com>
---

V2: Added if conditional checks for pwm callbacks since drivers may
implements only pwm capture functionality.

drivers/pwm/core.c | 21 +++++++++++++++------
1 file changed, 15 insertions(+), 6 deletions(-)

diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index 1581f6a..f70fe68 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -246,6 +246,10 @@ static bool pwm_ops_check(const struct pwm_ops *ops)
if (ops->apply)
return true;

+ /* driver supports capture operation */
+ if (ops->capture)
+ return true;
+
return false;
}

@@ -495,7 +499,8 @@ int pwm_apply_state(struct pwm_device *pwm, struct pwm_state *state)
* ->apply().
*/
if (pwm->state.enabled) {
- pwm->chip->ops->disable(pwm->chip, pwm);
+ if (pwm->chip->ops->disable)
+ pwm->chip->ops->disable(pwm->chip, pwm);
pwm->state.enabled = false;
}

@@ -509,22 +514,26 @@ int pwm_apply_state(struct pwm_device *pwm, struct pwm_state *state)

if (state->period != pwm->state.period ||
state->duty_cycle != pwm->state.duty_cycle) {
- err = pwm->chip->ops->config(pwm->chip, pwm,
+ if (pwm->chip->ops->config) {
+ err = pwm->chip->ops->config(pwm->chip, pwm,
state->duty_cycle,
state->period);
- if (err)
- return err;
+ if (err)
+ return err;
+ }

pwm->state.duty_cycle = state->duty_cycle;
pwm->state.period = state->period;
}

if (state->enabled != pwm->state.enabled) {
- if (state->enabled) {
+ if (state->enabled && pwm->chip->ops->enable) {
err = pwm->chip->ops->enable(pwm->chip, pwm);
if (err)
return err;
- } else {
+ }
+
+ if (!state->enabled && pwm->chip->ops->disable) {
pwm->chip->ops->disable(pwm->chip, pwm);
}

--
2.1.4
\
 
 \ /
  Last update: 2018-03-21 05:41    [W:1.052 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site