[lkml]   [2018]   [Mar]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v8 02/42] clk: davinci: New driver for davinci PLL clocks
Quoting David Lechner (2018-03-15 19:52:18)
> This adds a new driver for mach-davinci PLL clocks. This is porting the
> code from arch/arm/mach-davinci/clock.c to the common clock framework.
> Additionally, it adds device tree support for these clocks.
> The ifeq ($(CONFIG_COMMON_CLK), y) in the Makefile is needed to prevent
> compile errors until the clock code in arch/arm/mach-davinci is removed.
> Note: although there are similar clocks for TI Keystone we are not able
> to share the code for a few reasons. The keystone clocks are device tree
> only and use legacy one-node-per-clock bindings. Also the register
> layouts are a bit different, which would add even more if/else mess
> to the keystone clocks. And the keystone PLL driver doesn't support
> setting clock rates.
> Signed-off-by: David Lechner <>
> ---

Applied to clk-next

 \ /
  Last update: 2018-03-20 18:08    [W:0.541 / U:0.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site