lkml.org 
[lkml]   [2018]   [Mar]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/2] dt-bindings: usb: rt1711h device tree binding document
Hi Guenter,

2018-03-20 0:29 GMT+08:00 Guenter Roeck <linux@roeck-us.net>:
> On Mon, Mar 19, 2018 at 11:49:35AM +0800, ShuFan Lee wrote:
>> From: ShuFan Lee <shufan_lee@richtek.com>
>>
>> Add device tree binding document for Richtek RT1711H Type-C chip driver
>
> Cc: Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org
> is missing. Added here but it might make sense to resend.
Thank you for reminding, I'll resend it.

>
>>
>> Signed-off-by: ShuFan Lee <shufan_lee@richtek.com>
>> ---
>> .../devicetree/bindings/usb/richtek,rt1711h.txt | 30 ++++++++++++++++++++++
>> 1 file changed, 30 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
>>
>> changelogs between v2 & v3
>> - add dt-bindings document for rt1711h typec chip driver
>>
>> diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
>> new file mode 100644
>> index 000000000000..7da4dac78ea7
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
>> @@ -0,0 +1,30 @@
>> +Richtek RT1711H TypeC PD Controller.
>> +
>> +Required properties:
>> + - compatible : Must be "richtek,rt1711h".
>> + - reg : Must be 0x4e, it's slave address of RT1711H.
>> +
>> +Recommended properties :
>> + - interrupt-parent : the phandle for the interrupt controller that
>> + provides interrupts for this device.
>> + - interrupts : <a b> where a is the interrupt number and b represents an
>> + encoding of the sense and level information for the interrupt.
>> +
>> +Optional properties :
>> + - rt,intr-gpios : IRQ GPIO pin that's connected to RT1711H interrupt.
>> + if interrupt-parent & interrupts are not defined, use this property instead.
>> +
>> +Example :
>> +rt1711h@4e {
>> + compatible = "richtek,rt1711h";
>> + reg = <0x4e>;
>> + interrupt-parent = <&gpio26>;
>> + interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
>> +};
>> +
>> +Example using rt,intr-gpios :
>> +rt1711h@4e {
>> + compatible = "richtek,rt1711h";
>> + reg = <0x4e>;
>> + rt,intr-gpios = <&gpio26 0 0x0>;
>> +};
>> --
>> 1.9.1
>>



--
Best Regards,
書帆

\
 
 \ /
  Last update: 2018-03-20 09:54    [W:0.328 / U:0.672 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site