lkml.org 
[lkml]   [2018]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/8] arm64: zynqmp: Add support for Xilinx zcu100-revC
On Fri, Feb 23, 2018 at 03:40:24PM +0100, Michal Simek wrote:
> This board has 2GB of memory, i2c, sd, wifi sdio, spis, uarts, display
> port and usbs.
> Board is using fixed clocks because clock driver hasn't been merged yet.

Please get rid of the separate clocks dts file when it is merged.

>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> ---
>
> Changes in v2:
> - Use i2c-mux instead of i2cswitch
> - Remove i2c mw u-boot commands
> - Use 96boards labels for i2cs and spis
> - Fix pmic and wifi node
> - Record compatible string to xilinx.txt
> - Remove Nathalie's email (she left Xilinx already)
>
> Documentation/devicetree/bindings/arm/xilinx.txt | 6 +
> arch/arm64/boot/dts/xilinx/Makefile | 1 +
> arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi | 213 ++++++++++++++++
> arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 292 ++++++++++++++++++++++
> 4 files changed, 512 insertions(+)
> create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi
> create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts

Reviewed-by: Rob Herring <robh@kernel.org>

\
 
 \ /
  Last update: 2018-03-02 17:41    [W:0.082 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site