lkml.org 
[lkml]   [2018]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] arm64: dts: hikey: Enable HS200 mode on eMMC
From
Date
Hi Ryan,

On 2018/1/17 20:35, oscardagrach wrote:
> According to the hi6220 datasheet, the MMC controller is JEDEC eMMC 4.5
> compliant, in addition to supporting a clock of up to 150MHz. The Hikey
> schematic also indicates the device utilizes 1.8v signaling. Define these
> parameters in the device tree to enable HS200 mode.
>
> Signed-off-by: Ryan Grachek <ryan@edited.us>
> ---

Applied into hisilicon dt tree.
Thanks!

BR,
Wei

> arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> index 3aee6123d161..964e43e05ac6 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> @@ -299,7 +299,9 @@
> /* GPIO blocks 16 thru 19 do not appear to be routed to pins */
>
> dwmmc_0: dwmmc0@f723d000 {
> + max-frequency = <150000000>;
> cap-mmc-highspeed;
> + mmc-hs200-1_8v;
> non-removable;
> bus-width = <0x8>;
> vmmc-supply = <&ldo19>;
>

\
 
 \ /
  Last update: 2018-03-02 17:04    [W:0.049 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site