lkml.org 
[lkml]   [2018]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 1/2] dt-bindings: add bindings doc for HiSilicon INNO USB2 PHY
From
Date


On Thursday 01 March 2018 12:52 PM, Shawn Guo wrote:
> From: Pengcheng Li <lpc.li@hisilicon.com>
>
> It adds device tree bindings document for HiSilicon INNO USB2 PHY.
>
> Signed-off-by: Pengcheng Li <lpc.li@hisilicon.com>
> Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---
> .../devicetree/bindings/phy/phy-hisi-inno-usb2.txt | 52 ++++++++++++++++++++++
> 1 file changed, 52 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt
>
> diff --git a/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt
> new file mode 100644
> index 000000000000..b563cf54ca7b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt
> @@ -0,0 +1,52 @@
> +HiSilicon INNO USB2 PHY
> +
> +Required properties:
> +- compatible: Should be one of the following strings:
> + "hisilicon,inno-usb2-phy",
> + "hisilicon,hi3798cv200-usb2-phy".
> +- reg: Should be the address space for PHY configuration register in peripheral
> + controller, e.g. PERI_USB0 for USB 2.0 PHY01 on Hi3798cv200 SoC.
> +- #phy-cells: Should be 1. The specifier is the index of the PHY port to
> + reference.

This can be '0' if the consumers directly use phandle to the subnodes.

Thanks
Kishon

\
 
 \ /
  Last update: 2018-03-02 07:27    [W:0.056 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site