lkml.org 
[lkml]   [2018]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH net-next v2 2/2] dt: bindings: add new dt entries for brcmfmac
From
Date
On 03/19/2018 07:10 AM, Alexey Roslyakov wrote:
> Hi Arend,
> I appreciate your response. In my opinion, it has nothing to do with
> SDIO host, because it defines "quirks" in the driver itself.

It is not clear to me from your patch series whether the problem is that:

- the SDIO device has a specific alignment requirements, which would be
either a SDIO device driver limitation/issue or maybe the underlying
hardware device/firmware requiring that

- the SDIO host controller used is not capable of coping nicely with
these said limitations

It seems to me like what you are doing here is a) applicable to possibly
more SDIO devices and host combinations, and b) should likely be done at
the layer between the host and device, such that it is available to more
combinations.

> If I get it right, you mean something like this:
>
> mmc3: mmc@1c12000 {
> ...
> broken-sg-support;
> sd-head-align = 4;
> sd-sgentry-align = 512;
>
> brcmf: wifi@1 {
> ...
> };
> };
>
> Where dt: bindings documentation for these entries should reside?
> In generic MMC bindings? Well, this is the very special case and
> mmc-linux maintainer will unlikely to accept these changes.
> Also, extra kernel code modification might be required. It could make
> quite trivial change much more complex.

If the MMC maintainers are not copied on this patch series, it will
likely be hard for them to identify this patch series and chime in...

>
>> Also I am not sure if the broken-sg-support is still needed. We added that for omap_hsmmc, but that has since changed to scatter-gather emulation so it might not be needed anymore.
>
> I've experienced the problem with rk3288 (dw-mmc host) and sdio
> settings like above solved it.
> Frankly, I haven't investigated any deeper which one of the settings
> helped in my case yet...
> I will try to get rid of broken-sg-support first and let you know if
> it does make any difference.
>
> All the best,
> Alex.
>
> On 19 March 2018 at 16:31, Arend van Spriel
> <arend.vanspriel@broadcom.com> wrote:
>> On 3/19/2018 2:40 AM, Alexey Roslyakov wrote:
>>>
>>> In case if the host has higher align requirements for SG items, allow
>>> setting device-specific aligns for scatterlist items.
>>>
>>> Signed-off-by: Alexey Roslyakov <alexey.roslyakov@gmail.com>
>>> ---
>>> Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt | 5
>>> +++++
>>> 1 file changed, 5 insertions(+)
>>>
>>> diff --git
>>> a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
>>> b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
>>> index 86602f264dce..187b8c1b52a7 100644
>>> --- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
>>> +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
>>> @@ -17,6 +17,11 @@ Optional properties:
>>> When not specified the device will use in-band SDIO interrupts.
>>> - interrupt-names : name of the out-of-band interrupt, which must be
>>> set
>>> to "host-wake".
>>> + - brcm,broken-sg-support : boolean flag to indicate that the SDIO host
>>> + controller has higher align requirement than 32 bytes for each
>>> + scatterlist item.
>>> + - brcm,sd-head-align : alignment requirement for start of data buffer.
>>> + - brcm,sd-sgentry-align : length alignment requirement for each sg
>>> entry.
>>
>>
>> Hi Alexey,
>>
>> Thanks for the patch. However, the problem with these is that they are
>> characterizing the host controller and not the wireless device. So from
>> device tree perspective , which is to describe the hardware, these
>> properties should be SDIO host controller properties. Also I am not sure if
>> the broken-sg-support is still needed. We added that for omap_hsmmc, but
>> that has since changed to scatter-gather emulation so it might not be needed
>> anymore.
>>
>> Regards,
>> Arend
>
>
>


--
Florian

\
 
 \ /
  Last update: 2018-03-19 18:56    [W:0.070 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site