lkml.org 
[lkml]   [2018]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Re: [PATCH] staging: media: davinci_vpfe: add error handling on kmalloc failure
On Fri, Mar 16, 2018 at 11:32:34AM +0300, Dan Carpenter wrote:
> On Fri, Mar 16, 2018 at 01:58:23PM +0900, Ji-Hun Kim wrote:
> > There is no failure checking on the param value which will be allocated
> > memory by kmalloc. Add a null pointer checking statement. Then goto error:
> > and return -ENOMEM error code when kmalloc is failed.
> >
> > Signed-off-by: Ji-Hun Kim <ji_hun.kim@samsung.com>
> > ---
> > drivers/staging/media/davinci_vpfe/dm365_ipipe.c | 8 ++++++++
> > 1 file changed, 8 insertions(+)
> >
> > diff --git a/drivers/staging/media/davinci_vpfe/dm365_ipipe.c b/drivers/staging/media/davinci_vpfe/dm365_ipipe.c
> > index 6a3434c..55a922c 100644
> > --- a/drivers/staging/media/davinci_vpfe/dm365_ipipe.c
> > +++ b/drivers/staging/media/davinci_vpfe/dm365_ipipe.c
> > @@ -1280,6 +1280,10 @@ static int ipipe_s_config(struct v4l2_subdev *sd, struct vpfe_ipipe_config *cfg)
> >
> > params = kmalloc(sizeof(struct ipipe_module_params),
> > GFP_KERNEL);
> > + if (!params) {
> > + rval = -ENOMEM;
> > + goto error;
> ^^^^^^^^^^
>
> What does "goto error" do, do you think? It's not clear from the name.
> When you have an unclear goto like this it often means the error
> handling is going to be buggy.
>
> In this case, it does nothing so a direct "return -ENOMEM;" would be
> more clear. But the rest of the error handling is buggy.
Hi Dan,
I appreciate for your specific feedbacks. It looks more clear. And I'd
like you to see my question below. I will send the patch v2.

>
> 1263 static int ipipe_s_config(struct v4l2_subdev *sd, struct vpfe_ipipe_config *cfg)
> 1264 {
> 1265 struct vpfe_ipipe_device *ipipe = v4l2_get_subdevdata(sd);
> 1266 unsigned int i;
> 1267 int rval = 0;
> 1268
> 1269 for (i = 0; i < ARRAY_SIZE(ipipe_modules); i++) {
> 1270 unsigned int bit = 1 << i;
> 1271
> 1272 if (cfg->flag & bit) {
> 1273 const struct ipipe_module_if *module_if =
> 1274 &ipipe_modules[i];
> 1275 struct ipipe_module_params *params;
> 1276 void __user *from = *(void * __user *)
> 1277 ((void *)cfg + module_if->config_offset);
> 1278 size_t size;
> 1279 void *to;
> 1280
> 1281 params = kmalloc(sizeof(struct ipipe_module_params),
> 1282 GFP_KERNEL);
>
> Do a direct return:
>
> if (!params)
> return -ENOMEM;
>
> 1283 to = (void *)params + module_if->param_offset;
> 1284 size = module_if->param_size;
> 1285
> 1286 if (to && from && size) {
> 1287 if (copy_from_user(to, from, size)) {
> 1288 rval = -EFAULT;
> 1289 break;
>
> The most recent thing we allocated is "params" so lets do a
> "goto free_params;". We'll have to declare "params" at the start of the
> function instead inside this block.
>
> 1290 }
> 1291 rval = module_if->set(ipipe, to);
> 1292 if (rval)
> 1293 goto error;
>
> goto free_params again since params is still the most recent thing we
> allocated.
>
> 1294 } else if (to && !from && size) {
> 1295 rval = module_if->set(ipipe, NULL);
> 1296 if (rval)
> 1297 goto error;
>
> And here again goto free_params.
>
> 1298 }
> 1299 kfree(params);
> 1300 }
> 1301 }
> 1302 error:
> 1303 return rval;
>
>
> Change this to:
>
> return 0;
Instead of returning rval, returning 0 would be fine? It looks that should
return rval in normal case.

>
> free_params:
> kfree(params);
> return rval;
>
> 1304 }
>
> regards,
> dan carpenter
>
>
Thanks,
Ji-Hun

\
 
 \ /
  Last update: 2018-03-19 05:25    [W:0.083 / U:24.896 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site