lkml.org 
[lkml]   [2018]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] dmaengine: at_xdmac: fix rare residue corruption
On Mon, Mar 19, 2018 at 01:26:09PM +0530, Vinod Koul wrote:
> On Thu, Mar 01, 2018 at 09:25:16AM +0100, Ludovic Desroches wrote:
> > Hi Maxime,
> >
> > On Thu, Feb 22, 2018 at 12:39:55PM +0100, Maxime Jayat wrote:
> > > Despite the efforts made to correctly read the NDA and CUBC registers,
> > > the order in which the registers are read could sometimes lead to an
> > > inconsistent state.
> > >
> > > Re-using the timeline from the comments, this following timing of
> > > registers reads could lead to reading NDA with value "@desc2" and
> > > CUBC with value "MAX desc1":
> > >
> > > INITD -------- ------------
> > > |____________________|
> > > _______________________ _______________
> > > NDA @desc2 \/ @desc3
> > > _______________________/\_______________
> > > __________ ___________ _______________
> > > CUBC 0 \/ MAX desc1 \/ MAX desc2
> > > __________/\___________/\_______________
> > > | | | |
> > > Events:(1)(2) (3)(4)
> > >
> > > (1) check_nda = @desc2
> > > (2) initd = 1
> > > (3) cur_ubc = MAX desc1
> > > (4) cur_nda = @desc2
> > >
> > > This is allowed by the condition ((check_nda == cur_nda) && initd),
> > > despite cur_ubc and cur_nda being in the precise state we don't want.
> > >
> > > This error leads to incorrect residue computation.
> > >
> > > Fix it by inversing the order in which CUBC and INITD are read. This
> > > makes sure that NDA and CUBC are always read together either _before_
> > > INITD goes to 0 or _after_ it is back at 1.
> > > The case where NDA is read before INITD is at 0 and CUBC is read after
> > > INITD is back at 1 will be rejected by check_nda and cur_nda being
> > > different.
> > >
> > > Fixes: 53398f488821 ("dmaengine: at_xdmac: fix residue corruption")
> > > Cc: stable@vger.kernel.org
> > > Signed-off-by: Maxime Jayat <maxime.jayat@mobile-devices.fr>
> >
> > Nice work! I agree with the change you propose.
> >
> > I am disappointed we didn't spot this case so I would like to double-check with
> > the hardware guy there is no issue with the sequence you propose. That's
> > why I am waiting a bit before giving my ack.
>
> any update on that? This has been pending for a while...

Unfortunately not. As I am pretty confident in Maxime patch:
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>

>
> >
> > Regards
> >
> > Ludovic
> >
> > > ---
> > > Hi,
> > >
> > > I had a bug where the serial ports on the Atmel SAMA5D2 were sometimes
> > > returning the same data twice, for up to 4096 bytes.
> > >
> > > After investigation, I noticed that the ring buffer used in
> > > atmel_serial (in rx dma mode) had sometimes a incorrect "head" value,
> > > which made the ring buffer do a complete extraneous loop of data
> > > pushed to the tty layer.
> > >
> > > I tracked it down to the residue of the dma being wrong, and after
> > > more head scratching, I found this bug in the reading of the
> > > registers.
> > >
> > > Before fixing this, I was able to reproduce the bug reliably in a few
> > > minutes. With this patch applied, the bug did not reappear after
> > > several hours in testing.
> > >
> > >
> > > drivers/dma/at_xdmac.c | 4 ++--
> > > 1 file changed, 2 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c
> > > index c00e3923d7d8..94236ec9d410 100644
> > > --- a/drivers/dma/at_xdmac.c
> > > +++ b/drivers/dma/at_xdmac.c
> > > @@ -1471,10 +1471,10 @@ at_xdmac_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
> > > for (retry = 0; retry < AT_XDMAC_RESIDUE_MAX_RETRIES; retry++) {
> > > check_nda = at_xdmac_chan_read(atchan, AT_XDMAC_CNDA) & 0xfffffffc;
> > > rmb();
> > > - initd = !!(at_xdmac_chan_read(atchan, AT_XDMAC_CC) & AT_XDMAC_CC_INITD);
> > > - rmb();
> > > cur_ubc = at_xdmac_chan_read(atchan, AT_XDMAC_CUBC);
> > > rmb();
> > > + initd = !!(at_xdmac_chan_read(atchan, AT_XDMAC_CC) & AT_XDMAC_CC_INITD);
> > > + rmb();
> > > cur_nda = at_xdmac_chan_read(atchan, AT_XDMAC_CNDA) & 0xfffffffc;
> > > rmb();
> > >
> > > --
> > > 2.14.1
> > >
>
> --
> ~Vinod

\
 
 \ /
  Last update: 2018-03-19 09:00    [W:0.147 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site