lkml.org 
[lkml]   [2018]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] arm64: allwinner: h6: temporarily drop the usage of CCU headers in DTSI
On Mon, Mar 19, 2018 at 04:11:08PM +0800, Icenowy Zheng wrote:
> As the CCU driver will be merged in different tree with the device tree,
> temporarily drop the usage of CCU headers in the DTSI file, and replace
> macros with the corresponding numbers.
>
> After they are both merged into Linus' tree, it can be switched back to
> use the CCU headers.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> ---
> arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 20 +++++++++-----------
> 1 file changed, 9 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> index 4debc3962830..56563150d61a 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> @@ -4,8 +4,6 @@
> */
>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> -#include <dt-bindings/clock/sun50i-h6-ccu.h>
> -#include <dt-bindings/reset/sun50i-h6-ccu.h>
>
> / {
> interrupt-parent = <&gic>;
> @@ -117,7 +115,7 @@
> <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&ccu CLK_APB1>, <&osc24M>, <&osc32k>;
> + clocks = <&ccu 26>, <&osc24M>, <&osc32k>;
> clock-names = "apb", "hosc", "losc";
> gpio-controller;
> #gpio-cells = <3>;
> @@ -136,8 +134,8 @@
> interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
> reg-shift = <2>;
> reg-io-width = <4>;
> - clocks = <&ccu CLK_BUS_UART0>;
> - resets = <&ccu RST_BUS_UART0>;
> + clocks = <&ccu 70>;
> + resets = <&ccu 21>;
> status = "disabled";
> };
>
> @@ -147,8 +145,8 @@
> interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> reg-shift = <2>;
> reg-io-width = <4>;
> - clocks = <&ccu CLK_BUS_UART1>;
> - resets = <&ccu RST_BUS_UART1>;
> + clocks = <&ccu 71>;
> + resets = <&ccu 22>;
> status = "disabled";
> };
>
> @@ -158,8 +156,8 @@
> interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
> reg-shift = <2>;
> reg-io-width = <4>;
> - clocks = <&ccu CLK_BUS_UART2>;
> - resets = <&ccu RST_BUS_UART2>;
> + clocks = <&ccu 72>;
> + resets = <&ccu 23>;
> status = "disabled";
> };
>
> @@ -169,8 +167,8 @@
> interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> reg-shift = <2>;
> reg-io-width = <4>;
> - clocks = <&ccu CLK_BUS_UART3>;
> - resets = <&ccu RST_BUS_UART3>;
> + clocks = <&ccu 73>;
> + resets = <&ccu 24>;

Thanks, I squashed a similar patch earlier.

Maxime

--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-03-19 22:29    [W:0.039 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site