lkml.org 
[lkml]   [2018]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3.18 47/68] mtd: nand: fix interpretation of NAND_CMD_NONE in nand_command[_lp]()
Date
3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Miquel Raynal <miquel.raynal@free-electrons.com>


[ Upstream commit df467899da0b71465760b4e35127bce837244eee ]

Some drivers (like nand_hynix.c) call ->cmdfunc() with NAND_CMD_NONE
and a column address and expect the controller to only send address
cycles. Right now, the default ->cmdfunc() implementations provided by
the core do not filter out the command cycle in this case and forwards
the request to the controller driver through the ->cmd_ctrl() method.
The thing is, NAND controller drivers can get this wrong and send a
command cycle with a NAND_CMD_NONE opcode and since NAND_CMD_NONE is
-1, and the command field is usually casted to an u8, we end up sending
the 0xFF command which is actually a RESET operation.

Add conditions in nand_command[_lp]() functions to sending the initial
command cycle when command == NAND_CMD_NONE.

Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/mtd/nand/nand_base.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)

--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -600,7 +600,8 @@ static void nand_command(struct mtd_info
chip->cmd_ctrl(mtd, readcmd, ctrl);
ctrl &= ~NAND_CTRL_CHANGE;
}
- chip->cmd_ctrl(mtd, command, ctrl);
+ if (command != NAND_CMD_NONE)
+ chip->cmd_ctrl(mtd, command, ctrl);

/* Address cycle, when necessary */
ctrl = NAND_CTRL_ALE | NAND_CTRL_CHANGE;
@@ -629,6 +630,7 @@ static void nand_command(struct mtd_info
*/
switch (command) {

+ case NAND_CMD_NONE:
case NAND_CMD_PAGEPROG:
case NAND_CMD_ERASE1:
case NAND_CMD_ERASE2:
@@ -691,7 +693,9 @@ static void nand_command_lp(struct mtd_i
}

/* Command latch cycle */
- chip->cmd_ctrl(mtd, command, NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
+ if (command != NAND_CMD_NONE)
+ chip->cmd_ctrl(mtd, command,
+ NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);

if (column != -1 || page_addr != -1) {
int ctrl = NAND_CTRL_CHANGE | NAND_NCE | NAND_ALE;
@@ -724,6 +728,7 @@ static void nand_command_lp(struct mtd_i
*/
switch (command) {

+ case NAND_CMD_NONE:
case NAND_CMD_CACHEDPROG:
case NAND_CMD_PAGEPROG:
case NAND_CMD_ERASE1:

\
 
 \ /
  Last update: 2018-03-19 21:41    [W:0.967 / U:1.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site