lkml.org 
[lkml]   [2018]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RESEND PATCH v1 6/6] i2c: i2c-stm32f7: Implement I2C recovery mechanism
From
Date
Yes. Recovery mechanism is triggered whenever a busy line is detected.
This busy state can be checked by sw when either SDA or SCL is low: a bit is set
by Hw for this purpose.
On busy state I2C is reconfigured and lines are released the time of recovery.

Regards
On 03/17/2018 09:47 PM, Wolfram Sang wrote:
> On Mon, Mar 12, 2018 at 11:53:43AM +0100, Pierre-Yves MORDRET wrote:
>> Feature prevents I2C lock-ups. Mechanism resets I2C state machine
>> and releases SCL/SDA signals but preserves I2C registers.
>
> Does it release SDA when held down by the slave? Because that is what
> the recovery mechanism is for.
>

\
 
 \ /
  Last update: 2018-03-19 09:52    [W:0.085 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site