lkml.org 
[lkml]   [2018]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 0/7] KASan for arm
From
Date
On 03/18/2018 05:53 AM, Abbott Liu wrote:
> Changelog:
> v2 - v1
> - Fixed some compiling error which happens on changing kernel compression
> mode to lzma/xz/lzo/lz4.
> ---Reported by: Florian Fainelli <f.fainelli@gmail.com>,
> Russell King - ARM Linux <linux@armlinux.org.uk>
> - Fixed a compiling error cause by some older arm instruction set(armv4t)
> don't suppory movw/movt which is reported by kbuild.
> - Changed the pte flag from _L_PTE_DEFAULT | L_PTE_DIRTY | L_PTE_XN to
> pgprot_val(PAGE_KERNEL).
> ---Reported by: Russell King - ARM Linux <linux@armlinux.org.uk>
> - Moved Enable KASan patch as the last one.
> ---Reported by: Florian Fainelli <f.fainelli@gmail.com>,
> Russell King - ARM Linux <linux@armlinux.org.uk>
> - Moved the definitions of cp15 registers from
> arch/arm/include/asm/kvm_hyp.h to arch/arm/include/asm/cp15.h.
> ---Asked by: Mark Rutland <mark.rutland@arm.com>
> - Merge the following commits into the commit
> Define the virtual space of KASan's shadow region:
> 1) Define the virtual space of KASan's shadow region;
> 2) Avoid cleaning the KASan shadow area's mapping table;
> 3) Add KASan layout;
> - Merge the following commits into the commit
> Initialize the mapping of KASan shadow memory:
> 1) Initialize the mapping of KASan shadow memory;
> 2) Add support arm LPAE;
> 3) Don't need to map the shadow of KASan's shadow memory;
> ---Reported by: Russell King - ARM Linux <linux@armlinux.org.uk>
> 4) Change mapping of kasan_zero_page int readonly.
>
> Hi,all:
> These patches add arch specific code for kernel address sanitizer
> (see Documentation/kasan.txt).
>
> 1/8 of kernel addresses reserved for shadow memory. There was no
> big enough hole for this, so virtual addresses for shadow were
> stolen from user space.
>
> At early boot stage the whole shadow region populated with just
> one physical page (kasan_zero_page). Later, this page reused
> as readonly zero shadow for some memory that KASan currently
> don't track (vmalloc).
>
> After mapping the physical memory, pages for shadow memory are
> allocated and mapped.
>
> KASan's stack instrumentation significantly increases stack's
> consumption, so CONFIG_KASAN doubles THREAD_SIZE.
>
> Functions like memset/memmove/memcpy do a lot of memory accesses.
> If bad pointer passed to one of these function it is important
> to catch this. Compiler's instrumentation cannot do this since
> these functions are written in assembly.
>
> KASan replaces memory functions with manually instrumented variants.
> Original functions declared as weak symbols so strong definitions
> in mm/kasan/kasan.c could replace them. Original functions have aliases
> with '__' prefix in name, so we could call non-instrumented variant
> if needed.
>
> Some files built without kasan instrumentation (e.g. mm/slub.c).
> Original mem* function replaced (via #define) with prefixed variants
> to disable memory access checks for such files.
>
> On arm LPAE architecture, the mapping table of KASan shadow memory(if
> PAGE_OFFSET is 0xc0000000, the KASan shadow memory's virtual space is
> 0xb6e000000~0xbf000000) can't be filled in do_translation_fault function,
> because kasan instrumentation maybe cause do_translation_fault function
> accessing KASan shadow memory. The accessing of KASan shadow memory in
> do_translation_fault function maybe cause dead circle. So the mapping table
> of KASan shadow memory need be copyed in pgd_alloc function.
>
>
> Most of the code comes from:
> https://github.com/aryabinin/linux/commit/0b54f17e70ff50a902c4af05bb92716eb95acefe
>
> These patches are tested on vexpress-ca15, vexpress-ca9

BTW, it looks like you have some section mismatches:

WARNING: vmlinux.o(.meminit.text+0x40): Section mismatch in reference
from the function kasan_pte_populate() to the function
.init.text:kasan_alloc_block.constprop.5()
The function __meminit kasan_pte_populate() references
a function __init kasan_alloc_block.constprop.5().
If kasan_alloc_block.constprop.5 is only used by kasan_pte_populate then
annotate kasan_alloc_block.constprop.5 with a matching annotation.

WARNING: vmlinux.o(.meminit.text+0x144): Section mismatch in reference
from the function kasan_pmd_populate() to the function
.init.text:kasan_alloc_block.constprop.5()
The function __meminit kasan_pmd_populate() references
a function __init kasan_alloc_block.constprop.5().
If kasan_alloc_block.constprop.5 is only used by kasan_pmd_populate then
annotate kasan_alloc_block.constprop.5 with a matching annotation.

WARNING: vmlinux.o(.meminit.text+0x1a4): Section mismatch in reference
from the function kasan_pud_populate() to the function
.init.text:kasan_alloc_block.constprop.5()
The function __meminit kasan_pud_populate() references
a function __init kasan_alloc_block.constprop.5().
If kasan_alloc_block.constprop.5 is only used by kasan_pud_populate then
annotate kasan_alloc_block.constprop.5 with a matching annotation.


>
>
>
> Cc: Andrey Ryabinin <a.ryabinin@samsung.com>
> Tested-by: Abbott Liu <liuwenliang@huawei.com>
> Signed-off-by: Abbott Liu <liuwenliang@huawei.com>
>
> Abbott Liu (3):
> 2 1-byte checks more safer for memory_is_poisoned_16
> Add TTBR operator for kasan_init
> Define the virtual space of KASan's shadow region
>
> Andrey Ryabinin (4):
> Disable instrumentation for some code
> Replace memory function for kasan
> Initialize the mapping of KASan shadow memory
> Enable KASan for arm
>
> arch/arm/Kconfig | 1 +
> arch/arm/boot/compressed/Makefile | 1 +
> arch/arm/boot/compressed/decompress.c | 2 +
> arch/arm/boot/compressed/libfdt_env.h | 2 +
> arch/arm/include/asm/cp15.h | 104 ++++++++++++
> arch/arm/include/asm/kasan.h | 23 +++
> arch/arm/include/asm/kasan_def.h | 52 ++++++
> arch/arm/include/asm/kvm_hyp.h | 52 ------
> arch/arm/include/asm/memory.h | 5 +
> arch/arm/include/asm/pgalloc.h | 7 +-
> arch/arm/include/asm/string.h | 17 ++
> arch/arm/include/asm/thread_info.h | 4 +
> arch/arm/kernel/entry-armv.S | 5 +-
> arch/arm/kernel/entry-common.S | 6 +-
> arch/arm/kernel/head-common.S | 7 +-
> arch/arm/kernel/setup.c | 2 +
> arch/arm/kernel/unwind.c | 3 +-
> arch/arm/kvm/hyp/cp15-sr.c | 12 +-
> arch/arm/kvm/hyp/switch.c | 6 +-
> arch/arm/lib/memcpy.S | 3 +
> arch/arm/lib/memmove.S | 5 +-
> arch/arm/lib/memset.S | 3 +
> arch/arm/mm/Makefile | 3 +
> arch/arm/mm/init.c | 6 +
> arch/arm/mm/kasan_init.c | 290 ++++++++++++++++++++++++++++++++++
> arch/arm/mm/mmu.c | 7 +-
> arch/arm/mm/pgd.c | 14 ++
> arch/arm/vdso/Makefile | 2 +
> mm/kasan/kasan.c | 24 ++-
> 29 files changed, 588 insertions(+), 80 deletions(-)
> create mode 100644 arch/arm/include/asm/kasan.h
> create mode 100644 arch/arm/include/asm/kasan_def.h
> create mode 100644 arch/arm/mm/kasan_init.c
>


--
Florian

\
 
 \ /
  Last update: 2018-03-19 19:55    [W:0.092 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site