lkml.org 
[lkml]   [2018]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL for 4.9 186/281] net: phy: micrel: Restore led_mode and clk_sel on resume
Date
From: Leonard Crestez <leonard.crestez@nxp.com>

[ Upstream commit 79e498a9c7da0737829ff864aae44df434105676 ]

These bits seem to be lost after a suspend/resume cycle so just set them
again. Do this by splitting the handling of these bits into a function
that is also called on resume.

This patch fixes ethernet suspend/resume on imx6ul-14x14-evk boards.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
drivers/net/phy/micrel.c | 42 ++++++++++++++++++++++++++++--------------
1 file changed, 28 insertions(+), 14 deletions(-)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 2032a6de026b..4da73e2c37cf 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -268,23 +268,12 @@ static int kszphy_nand_tree_disable(struct phy_device *phydev)
return ret;
}

-static int kszphy_config_init(struct phy_device *phydev)
+/* Some config bits need to be set again on resume, handle them here. */
+static int kszphy_config_reset(struct phy_device *phydev)
{
struct kszphy_priv *priv = phydev->priv;
- const struct kszphy_type *type;
int ret;

- if (!priv)
- return 0;
-
- type = priv->type;
-
- if (type->has_broadcast_disable)
- kszphy_broadcast_disable(phydev);
-
- if (type->has_nand_tree_disable)
- kszphy_nand_tree_disable(phydev);
-
if (priv->rmii_ref_clk_sel) {
ret = kszphy_rmii_clk_sel(phydev, priv->rmii_ref_clk_sel_val);
if (ret) {
@@ -295,7 +284,7 @@ static int kszphy_config_init(struct phy_device *phydev)
}

if (priv->led_mode >= 0)
- kszphy_setup_led(phydev, type->led_mode_reg, priv->led_mode);
+ kszphy_setup_led(phydev, priv->type->led_mode_reg, priv->led_mode);

if (phy_interrupt_is_valid(phydev)) {
int ctl = phy_read(phydev, MII_BMCR);
@@ -311,6 +300,25 @@ static int kszphy_config_init(struct phy_device *phydev)
return 0;
}

+static int kszphy_config_init(struct phy_device *phydev)
+{
+ struct kszphy_priv *priv = phydev->priv;
+ const struct kszphy_type *type;
+
+ if (!priv)
+ return 0;
+
+ type = priv->type;
+
+ if (type->has_broadcast_disable)
+ kszphy_broadcast_disable(phydev);
+
+ if (type->has_nand_tree_disable)
+ kszphy_nand_tree_disable(phydev);
+
+ return kszphy_config_reset(phydev);
+}
+
static int ksz8041_config_init(struct phy_device *phydev)
{
struct device_node *of_node = phydev->mdio.dev.of_node;
@@ -715,8 +723,14 @@ static int kszphy_suspend(struct phy_device *phydev)

static int kszphy_resume(struct phy_device *phydev)
{
+ int ret;
+
genphy_resume(phydev);

+ ret = kszphy_config_reset(phydev);
+ if (ret)
+ return ret;
+
/* Enable PHY Interrupts */
if (phy_interrupt_is_valid(phydev)) {
phydev->interrupts = PHY_INTERRUPT_ENABLED;
--
2.14.1
\
 
 \ /
  Last update: 2018-03-19 19:04    [W:0.921 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site