lkml.org 
[lkml]   [2018]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 10/19] arm: dts: mt7623: remove useless property pinctrl-names at node
From
Date


On 02/23/2018 11:16 AM, sean.wang@mediatek.com wrote:
> From: Sean Wang <sean.wang@mediatek.com>
>
> The property pinctrl-names is totally superfluous. It would be good to
> remove the property to keep the node neatness. There is actually
> unnecessary to set up any pins for data path TRGMII between main SoC and
> MT7530. Furthermore, it's more reasonable for the pin setup of control
> path MDIO bus is being placed inside the node of ethernet controller.
>
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>

Pushed to v4.16-next/dts32

Thanks!

> ---
> arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> index 6b760be..f2d3cfb 100644
> --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> @@ -151,7 +151,6 @@
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0>;
> - pinctrl-names = "default";
> reset-gpios = <&pio 33 0>;
> core-supply = <&mt6323_vpa_reg>;
> io-supply = <&mt6323_vemc3v3_reg>;
>

\
 
 \ /
  Last update: 2018-03-19 00:50    [W:0.243 / U:1.796 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site