Messages in this thread | | | Subject | Re: [linux-sunxi] [PATCH v4 4/9] pinctrl: sunxi: add support for the Allwinner H6 main pin controller | From | Andre Przywara <> | Date | Fri, 16 Mar 2018 17:07:28 +0000 |
| |
Hi,
On 16/03/18 14:02, Icenowy Zheng wrote: > The Allwinner H6 SoC has two pin controllers, one main controller > (called CPUX-PORT in user manual) and one controller in CPUs power > domain (called CPUS-PORT in user manual). > > This commit introduces support for the main pin controller on H6. > > The pin bank A and B are not wired out and hidden from the SoC's > documents, however it's shown that the "ATE" (an AC200 chip > co-packaged with the H6 die) is connected to the main SoC die via these > pin banks. The information about these banks is just copied from the BSP > pinctrl driver, but re-formatted to fit the mainline pinctrl driver > format. The GPIO functions are dropped, as they're impossible to use -- > except a GPIO&IRQ only pin (PB20) which might be the IRQ of ATE. > > Signed-off-by: Icenowy Zheng <icenowy@aosc.io> > Acked-by: Rob Herring <robh@kernel.org>
As mentioned before, I checked every single pin against the manual and this looks correct to me.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Thanks! Andre.
| |