lkml.org 
[lkml]   [2018]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[Blackfin removal] [PATCH 26/28] samples: Remove Blackfin gptimers sample code
Date
Signed-off-by: Aaron Wu <aaron.wu@analog.com>

Remove Blackfin gptimers sample code
---
samples/Kconfig | 6 ---
samples/Makefile | 2 +-
samples/blackfin/Makefile | 1 -
samples/blackfin/gptimers-example.c | 91 -------------------------------------
4 files changed, 1 insertion(+), 99 deletions(-)
delete mode 100644 samples/blackfin/Makefile
delete mode 100644 samples/blackfin/gptimers-example.c

diff --git a/samples/Kconfig b/samples/Kconfig
index c332a3b..f524f55 100644
--- a/samples/Kconfig
+++ b/samples/Kconfig
@@ -98,12 +98,6 @@ config SAMPLE_SECCOMP
Build samples of seccomp filters using various methods of
BPF filter construction.

-config SAMPLE_BLACKFIN_GPTIMERS
- tristate "Build blackfin gptimers sample code -- loadable modules only"
- depends on BLACKFIN && BFIN_GPTIMERS && m
- help
- Build samples of blackfin gptimers sample module.
-
config SAMPLE_VFIO_MDEV_MTTY
tristate "Build VFIO mtty example mediated device sample code -- loadable modules only"
depends on VFIO_MDEV_DEVICE && m
diff --git a/samples/Makefile b/samples/Makefile
index db54e76..70cf375 100644
--- a/samples/Makefile
+++ b/samples/Makefile
@@ -2,5 +2,5 @@

obj-$(CONFIG_SAMPLES) += kobject/ kprobes/ trace_events/ livepatch/ \
hw_breakpoint/ kfifo/ kdb/ hidraw/ rpmsg/ seccomp/ \
- configfs/ connector/ v4l/ trace_printk/ blackfin/ \
+ configfs/ connector/ v4l/ trace_printk/ \
vfio-mdev/ statx/
diff --git a/samples/blackfin/Makefile b/samples/blackfin/Makefile
deleted file mode 100644
index 89b86cf..0000000
--- a/samples/blackfin/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_SAMPLE_BLACKFIN_GPTIMERS) += gptimers-example.o
diff --git a/samples/blackfin/gptimers-example.c b/samples/blackfin/gptimers-example.c
deleted file mode 100644
index 283eba9..0000000
--- a/samples/blackfin/gptimers-example.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Simple gptimers example
- * http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:drivers:gptimers
- *
- * Copyright 2007-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/interrupt.h>
-#include <linux/module.h>
-
-#include <asm/gptimers.h>
-#include <asm/portmux.h>
-
-/* ... random driver includes ... */
-
-#define DRIVER_NAME "gptimer_example"
-
-#ifdef IRQ_TIMER5
-#define SAMPLE_IRQ_TIMER IRQ_TIMER5
-#else
-#define SAMPLE_IRQ_TIMER IRQ_TIMER2
-#endif
-
-struct gptimer_data {
- uint32_t period, width;
-};
-static struct gptimer_data data;
-
-/* ... random driver state ... */
-
-static irqreturn_t gptimer_example_irq(int irq, void *dev_id)
-{
- struct gptimer_data *data = dev_id;
-
- /* make sure it was our timer which caused the interrupt */
- if (!get_gptimer_intr(TIMER5_id))
- return IRQ_NONE;
-
- /* read the width/period values that were captured for the waveform */
- data->width = get_gptimer_pwidth(TIMER5_id);
- data->period = get_gptimer_period(TIMER5_id);
-
- /* acknowledge the interrupt */
- clear_gptimer_intr(TIMER5_id);
-
- /* tell the upper layers we took care of things */
- return IRQ_HANDLED;
-}
-
-/* ... random driver code ... */
-
-static int __init gptimer_example_init(void)
-{
- int ret;
-
- /* grab the peripheral pins */
- ret = peripheral_request(P_TMR5, DRIVER_NAME);
- if (ret) {
- printk(KERN_NOTICE DRIVER_NAME ": peripheral request failed\n");
- return ret;
- }
-
- /* grab the IRQ for the timer */
- ret = request_irq(SAMPLE_IRQ_TIMER, gptimer_example_irq,
- IRQF_SHARED, DRIVER_NAME, &data);
- if (ret) {
- printk(KERN_NOTICE DRIVER_NAME ": IRQ request failed\n");
- peripheral_free(P_TMR5);
- return ret;
- }
-
- /* setup the timer and enable it */
- set_gptimer_config(TIMER5_id,
- WDTH_CAP | PULSE_HI | PERIOD_CNT | IRQ_ENA);
- enable_gptimers(TIMER5bit);
-
- return 0;
-}
-module_init(gptimer_example_init);
-
-static void __exit gptimer_example_exit(void)
-{
- disable_gptimers(TIMER5bit);
- free_irq(SAMPLE_IRQ_TIMER, &data);
- peripheral_free(P_TMR5);
-}
-module_exit(gptimer_example_exit);
-
-MODULE_LICENSE("BSD");
--
2.7.4
\
 
 \ /
  Last update: 2018-03-16 08:21    [W:0.089 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site