lkml.org 
[lkml]   [2018]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 6/9] dt-bindings: add device tree binding for Allwinner H6 main CCU
Date
The Allwinner H6 main CCU uses the internal oscillator of the SoC, which
is different with old SoCs' main CCU.

Add device tree binding for the Allwinner H6 main CCU.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
Extracted in v4.

Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
index 4ca21c3a6fc9..460ef27b1008 100644
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -20,6 +20,7 @@ Required properties :
- "allwinner,sun50i-a64-ccu"
- "allwinner,sun50i-a64-r-ccu"
- "allwinner,sun50i-h5-ccu"
+ - "allwinner,sun50i-h6-ccu"
- "nextthing,gr8-ccu"

- reg: Must contain the registers base address and length
@@ -31,6 +32,9 @@ Required properties :
- #clock-cells : must contain 1
- #reset-cells : must contain 1

+For the main CCU on H6, one more clock is needed:
+- "iosc": the SoC's internal frequency oscillator
+
For the PRCM CCUs on A83T/H3/A64, two more clocks are needed:
- "pll-periph": the SoC's peripheral PLL from the main CCU
- "iosc": the SoC's internal frequency oscillator
--
2.15.1
\
 
 \ /
  Last update: 2018-03-16 15:06    [W:0.136 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site