lkml.org 
[lkml]   [2018]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 19/21] spi: Remove depends on HAS_DMA in case of platform dependency
Date
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another
symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST".
In most cases this other symbol is an architecture or platform specific
symbol, or PCI.

Generic symbols and drivers without platform dependencies keep their
dependencies on HAS_DMA, to prevent compiling subsystems or drivers that
cannot work anyway.

This simplifies the dependencies, and allows to improve compile-testing.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
---
v2:
- Add Reviewed-by, Acked-by,
- Drop RFC state,
- Split per subsystem.
---
drivers/spi/Kconfig | 12 +++---------
1 file changed, 3 insertions(+), 9 deletions(-)

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 603783976b8152d4..7bd3a94f58511c41 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -71,7 +71,6 @@ config SPI_ARMADA_3700

config SPI_ATMEL
tristate "Atmel SPI Controller"
- depends on HAS_DMA
depends on (ARCH_AT91 || AVR32 || COMPILE_TEST)
help
This selects a driver for the Atmel SPI Controller, present on
@@ -252,7 +251,6 @@ config SPI_EFM32

config SPI_EP93XX
tristate "Cirrus Logic EP93xx SPI controller"
- depends on HAS_DMA
depends on ARCH_EP93XX || COMPILE_TEST
help
This enables using the Cirrus EP93xx SPI controller in master
@@ -374,7 +372,6 @@ config SPI_FSL_SPI
config SPI_FSL_DSPI
tristate "Freescale DSPI controller"
select REGMAP_MMIO
- depends on HAS_DMA
depends on SOC_VF610 || SOC_LS1021A || ARCH_LAYERSCAPE || M5441x || COMPILE_TEST
help
This enables support for the Freescale DSPI controller in master
@@ -450,7 +447,6 @@ config SPI_OMAP_UWIRE

config SPI_OMAP24XX
tristate "McSPI driver for OMAP"
- depends on HAS_DMA
depends on ARCH_OMAP2PLUS || COMPILE_TEST
select SG_SPLIT
help
@@ -459,7 +455,6 @@ config SPI_OMAP24XX

config SPI_TI_QSPI
tristate "DRA7xxx QSPI controller support"
- depends on HAS_DMA
depends on ARCH_OMAP2PLUS || COMPILE_TEST
help
QSPI master controller for DRA7xxx used for flash devices.
@@ -488,7 +483,6 @@ config SPI_PIC32
config SPI_PIC32_SQI
tristate "Microchip PIC32 Quad SPI driver"
depends on MACH_PIC32 || COMPILE_TEST
- depends on HAS_DMA
help
SPI driver for PIC32 Quad SPI controller.

@@ -591,7 +585,7 @@ config SPI_SC18IS602

config SPI_SH_MSIOF
tristate "SuperH MSIOF SPI controller"
- depends on HAVE_CLK && HAS_DMA
+ depends on HAVE_CLK
depends on ARCH_SHMOBILE || ARCH_RENESAS || COMPILE_TEST
help
SPI driver for SuperH and SH Mobile MSIOF blocks.
@@ -669,7 +663,7 @@ config SPI_MXS
config SPI_TEGRA114
tristate "NVIDIA Tegra114 SPI Controller"
depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST
- depends on RESET_CONTROLLER && HAS_DMA
+ depends on RESET_CONTROLLER
help
SPI driver for NVIDIA Tegra114 SPI Controller interface. This controller
is different than the older SoCs SPI controller and also register interface
@@ -687,7 +681,7 @@ config SPI_TEGRA20_SFLASH
config SPI_TEGRA20_SLINK
tristate "Nvidia Tegra20/Tegra30 SLINK Controller"
depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST
- depends on RESET_CONTROLLER && HAS_DMA
+ depends on RESET_CONTROLLER
help
SPI driver for Nvidia Tegra20/Tegra30 SLINK Controller interface.

--
2.7.4
\
 
 \ /
  Last update: 2018-03-16 15:03    [W:0.101 / U:0.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site