lkml.org 
[lkml]   [2018]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 10/10] arm64: dts: marvell: mcbin: enable the fourth network interface
Date
This patch enables the fourth network interface on the Marvell
Macchiatobin. It is configured in the 2500Base-X PHY mode.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
---
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index 626e9d0462c3..1ce31bfe6197 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -66,6 +66,7 @@
ethernet0 = &cp0_eth0;
ethernet1 = &cp1_eth0;
ethernet2 = &cp1_eth1;
+ ethernet3 = &cp1_eth2;
};

/* Regulator labels correspond with schematics */
@@ -285,6 +286,16 @@
phys = <&cp1_comphy0 1>;
};

+&cp1_eth2 {
+ /* CPS Lane 5 */
+ status = "okay";
+ /* Network PHY */
+ phy-mode = "2500base-x";
+ managed = "in-band-status";
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp1_comphy5 2>;
+};
+
&cp1_pinctrl {
cp1_spi1_pins: spi1-pins {
marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16";
--
2.14.3
\
 
 \ /
  Last update: 2018-03-16 11:37    [W:0.074 / U:1.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site