lkml.org 
[lkml]   [2018]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH] iio: adc: Add Xilinx AMS driver
On Thu, Mar 15, 2018 at 08:12:27PM +0530, Manish Narani wrote:
> The AMS includes an ADC as well as on-chip sensors that can be used to
> sample external voltages and monitor on-die operating conditions, such as
> temperature and supply voltage levels. The AMS has two SYSMON blocks.
> PL-SYSMON block is capable of monitoring off chip voltage and temperature.
> PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring from
> external master. Out of these interface currently only DRP is supported.
> Other block PS-SYSMON is memory mapped to PS.
>
> The AMS can use internal channels to monitor voltage and temperature
> as well as one primary and up to 16 auxiliary channels for measuring
> external voltages.
>
> The voltage and temperature monitoring channels also have event
> capability which allows to generate an interrupt when their value
> falls below or raises above a set threshold.
>
> Signed-off-by: Manish Narani <mnarani@xilinx.com>
> ---

[..]

> +static const struct of_device_id ams_of_match_table[] = {
> + { .compatible = "xlnx,zynqmp-ams", &ams_pl_apb },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, ams_of_match_table);

[..]

> +static int ams_probe(struct platform_device *pdev)
> +{
> + struct iio_dev *indio_dev;
> + struct ams *ams;
> + struct resource *res;
> + const struct of_device_id *id;
> + int ret;
> +
> + if (!pdev->dev.of_node)
> + return -ENODEV;
> +
> + id = of_match_node(ams_of_match_table, pdev->dev.of_node);
> + if (!id)
> + return -ENODEV;

Is the above check required ?

Isn't the probe function called if and only if a match is found in
ams_of_match_table[] since it is a pure OF driver ?

And therefore the above condition would never happen!

> +static struct platform_driver ams_driver = {
> + .probe = ams_probe,
> + .remove = ams_remove,
> + .driver = {
> + .name = "ams",
> + .pm = &ams_pm_ops,
> + .of_match_table = ams_of_match_table,
> + },
> +};
> +module_platform_driver(ams_driver);


--
Thanks
Himanshu Jha

\
 
 \ /
  Last update: 2018-03-16 21:21    [W:4.445 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site