lkml.org 
[lkml]   [2018]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 01/14] KVM: s390: refactor crypto initialization
From
Date
On 03/15/2018 08:26 AM, Pierre Morel wrote:
> On 14/03/2018 19:25, Tony Krowiak wrote:
>> This patch refactors the code that initializes the crypto
>> configuration for a guest. The crypto configuration is contained in
>> a crypto control block (CRYCB) which is a satellite control block to
>> our main hardware virtualization control block. The CRYCB is
>> attached to the main virtualization control block via a CRYCB
>> designation (CRYCBD) designation field containing the address of
>> the CRYCB as well as its format.
>>
>> Prior to the introduction of AP device virtualization, there was
>> no need to provide access to or specify the format of the CRYCB for
>> a guest unless the MSA extension 3 (MSAX3) facility was installed
>> on the host system. With the introduction of AP device virtualization,
>> the CRYCB and its format must be made accessible to the guest
>> regardless of the presence of the MSAX3 facility.
>>
>> The crypto initialization code is restructured as follows:
>>
>> * A new compilation unit is introduced to contain all interfaces
>> and data structures related to configuring a guest's CRYCB for
>> both the refactoring of crypto initialization as well as all
>> subsequent patches introducing AP virtualization support.
>>
>> * Currently, the asm code for querying the AP configuration is
>> duplicated in the AP bus as well as in KVM. Since the KVM
>> code was introduced, the AP bus has externalized the interface
>> for querying the AP configuration. The KVM interface will be
>> replaced with a call to the AP bus interface. Of course, this
>> will be moved to the new compilation unit mentioned above.
>>
>> * An interface to format the CRYCBD field will be provided via
>> the new compilation unit and called from the KVM vm
>> initialization.
>>
>> Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
>> ---
>> MAINTAINERS | 10 ++++++
>> arch/s390/include/asm/kvm-ap.h | 16 ++++++++++
>> arch/s390/include/asm/kvm_host.h | 1 +
>> arch/s390/kvm/Kconfig | 1 +
>> arch/s390/kvm/Makefile | 2 +-
>> arch/s390/kvm/kvm-ap.c | 48 +++++++++++++++++++++++++++++
>> arch/s390/kvm/kvm-s390.c | 61
>> ++++---------------------------------
>> 7 files changed, 84 insertions(+), 55 deletions(-)
>> create mode 100644 arch/s390/include/asm/kvm-ap.h
>> create mode 100644 arch/s390/kvm/kvm-ap.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 0ec5881..72742d5 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -11875,6 +11875,16 @@ W:
>> http://www.ibm.com/developerworks/linux/linux390/
>> S: Supported
>> F: drivers/s390/crypto/
>>
>> +S390 VFIO AP DRIVER
>> +M: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
>> +M: Christian Borntraeger <borntraeger@de.ibm.com>
>> +M: Martin Schwidefsky <schwidefsky@de.ibm.com>
>> +L: linux-s390@vger.kernel.org
>> +W: http://www.ibm.com/developerworks/linux/linux390/
>> +S: Supported
>> +F: arch/s390/include/asm/kvm/kvm-ap.h
>> +F: arch/s390/kvm/kvm-ap.c
>> +
>> S390 ZFCP DRIVER
>> M: Steffen Maier <maier@linux.vnet.ibm.com>
>> M: Benjamin Block <bblock@linux.vnet.ibm.com>
>> diff --git a/arch/s390/include/asm/kvm-ap.h
>> b/arch/s390/include/asm/kvm-ap.h
>> new file mode 100644
>> index 0000000..362846c
>> --- /dev/null
>> +++ b/arch/s390/include/asm/kvm-ap.h
>> @@ -0,0 +1,16 @@
>> +/*
>> + * Adjunct Processor (AP) configuration management for KVM guests
>> + *
>> + * Copyright IBM Corp. 2017
>> + *
>> + * Author(s): Tony Krowiak <akrowia@linux.vnet.ibm.com>
>> + */
>> +
>> +#ifndef _ASM_KVM_AP
>> +#define _ASM_KVM_AP
>> +#include <linux/types.h>
>> +#include <linux/kvm_host.h>
>> +
>> +void kvm_ap_build_crycbd(struct kvm *kvm);
>> +
>> +#endif /* _ASM_KVM_AP */
>> diff --git a/arch/s390/include/asm/kvm_host.h
>> b/arch/s390/include/asm/kvm_host.h
>> index 34c9b5b..65a944e 100644
>> --- a/arch/s390/include/asm/kvm_host.h
>> +++ b/arch/s390/include/asm/kvm_host.h
>> @@ -257,6 +257,7 @@ struct kvm_s390_sie_block {
>> __u8 reservedf0[12]; /* 0x00f0 */
>> #define CRYCB_FORMAT1 0x00000001
>> #define CRYCB_FORMAT2 0x00000003
>> +#define CRYCB_FORMAT_MASK 0x00000003
>> __u32 crycbd; /* 0x00fc */
>> __u64 gcr[16]; /* 0x0100 */
>> __u64 gbea; /* 0x0180 */
>> diff --git a/arch/s390/kvm/Kconfig b/arch/s390/kvm/Kconfig
>> index a3dbd45..4ca9077 100644
>> --- a/arch/s390/kvm/Kconfig
>> +++ b/arch/s390/kvm/Kconfig
>> @@ -33,6 +33,7 @@ config KVM
>> select HAVE_KVM_INVALID_WAKEUPS
>> select SRCU
>> select KVM_VFIO
>> + select ZCRYPT
>
> I do not think it is a good solution to *always* enable ZCRYPT
> when we have KVM.
If CONFIG_ZCRYPT is not selected, then the kvm_ap_apxa_installed()
function will not compile
because it calls a zcrypt interface. How would you suggest we make sure
zcrypt interfaces
used in KVM are built if CONFIG_ZCRYPT is not selected?
>
> Pierre
>
>

\
 
 \ /
  Last update: 2018-03-15 15:50    [W:0.102 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site