lkml.org 
[lkml]   [2018]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] dt-bindings: analogix-dp: Add backlight-pwm-passthru
Date
Documentation for the optional backlight-pwm-passthru property.
Tells the EDP panel to folow the input pwm frequency instead
of generating its own.

Signed-off-by: Alexandru M Stan <amstan@chromium.org>
---

Documentation/devicetree/bindings/display/bridge/analogix_dp.txt | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
index 0c7473dd0e51..3c15242f6ce3 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
@@ -23,6 +23,10 @@ Required properties for dp-controller:
from general PHY binding: Should be "dp".

Optional properties for dp-controller:
+ -backlight-pwm-passthru:
+ Directly pass the PWM frequency applied to the BL_PWM_DIM
+ pin to the backlight current source. Done via
+ EDP_BACKLIGHT_MODE_SET_REGISTER on DPCD.
-force-hpd:
Indicate driver need force hpd when hpd detect failed, this
is used for some eDP screen which don't have hpd signal.
--
2.13.5
\
 
 \ /
  Last update: 2018-03-16 04:01    [W:0.084 / U:1.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site