lkml.org 
[lkml]   [2018]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH/RFC 1/2] PM / wakeup: Add callback for wake-up change notification
From
Date
On 03/14/2018 02:26 PM, Geert Uytterhoeven wrote:

> Add a callback to inform a device that his wake-up setting has been

s/his/its/.

> changed. This allows a device to synchronize device configuration with
> an external user action.
>
> E.g. on systems using a Rohm BD9571MWV PMIC and a toggle accessory power
> switch, the system suspend procedure is:
> 1. Configure PMIC for DDR backup mode, which changes the role of the
> accessory power switch from a power to a wake-up switch,
> 2. Switch accessory power switch off, to prepare for system suspend,
> 3. Suspend system.
>
> Hence step 1 cannot be done in the PMIC's suspend callback, but it can
> be done in the new callback, in response to the user writing "enabled"
> to the PMIC's wakeup virtual file in sysfs.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[...]

MBR, Sergei

\
 
 \ /
  Last update: 2018-03-14 16:58    [W:1.023 / U:0.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site