lkml.org 
[lkml]   [2018]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 06/47] net: smsc: remove m32r specific smc91x configuration
On Wed, 14 Mar 2018, Arnd Bergmann wrote:

> The m32r architecture is getting removed, so this part can be
> cleaned up as well.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Acked-by: Nicolas Pitre <nico@fluxnic.net>

> ---
> drivers/net/ethernet/smsc/Kconfig | 4 ++--
> drivers/net/ethernet/smsc/smc91x.h | 26 --------------------------
> 2 files changed, 2 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig
> index 4c2f612e4414..1c2b6663f7ce 100644
> --- a/drivers/net/ethernet/smsc/Kconfig
> +++ b/drivers/net/ethernet/smsc/Kconfig
> @@ -37,8 +37,8 @@ config SMC91X
> select CRC32
> select MII
> depends on !OF || GPIOLIB
> - depends on ARM || ARM64 || ATARI_ETHERNAT || BLACKFIN || COLDFIRE || \
> - M32R || MIPS || MN10300 || NIOS2 || SUPERH || XTENSA || H8300
> + depends on ARM || ARM64 || ATARI_ETHERNAT || COLDFIRE || \
> + MIPS || NIOS2 || SUPERH || XTENSA || H8300
> ---help---
> This is a driver for SMC's 91x series of Ethernet chipsets,
> including the SMC91C94 and the SMC91C111. Say Y if you want it
> diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h
> index 08b17adf0a65..b337ee97e0c0 100644
> --- a/drivers/net/ethernet/smsc/smc91x.h
> +++ b/drivers/net/ethernet/smsc/smc91x.h
> @@ -144,32 +144,6 @@ static inline void _SMC_outw_align4(u16 val, void __iomem *ioaddr, int reg,
>
> #define SMC_IRQ_FLAGS (0)
>
> -#elif defined(CONFIG_M32R)
> -
> -#define SMC_CAN_USE_8BIT 0
> -#define SMC_CAN_USE_16BIT 1
> -#define SMC_CAN_USE_32BIT 0
> -
> -#define SMC_inb(a, r) inb(((u32)a) + (r))
> -#define SMC_inw(a, r) inw(((u32)a) + (r))
> -#define SMC_outb(v, a, r) outb(v, ((u32)a) + (r))
> -#define SMC_outw(lp, v, a, r) outw(v, ((u32)a) + (r))
> -#define SMC_insw(a, r, p, l) insw(((u32)a) + (r), p, l)
> -#define SMC_outsw(a, r, p, l) outsw(((u32)a) + (r), p, l)
> -
> -#define SMC_IRQ_FLAGS (0)
> -
> -#define RPC_LSA_DEFAULT RPC_LED_TX_RX
> -#define RPC_LSB_DEFAULT RPC_LED_100_10
> -
> -#elif defined(CONFIG_MN10300)
> -
> -/*
> - * MN10300/AM33 configuration
> - */
> -
> -#include <unit/smc91111.h>
> -
> #elif defined(CONFIG_ATARI)
>
> #define SMC_CAN_USE_8BIT 1
> --
> 2.9.0
>
>

\
 
 \ /
  Last update: 2018-03-14 16:46    [W:0.448 / U:0.808 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site