lkml.org 
[lkml]   [2018]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] ACPI / CPPC: Update all pr_(debug/err) messages to log the susbspace id
Date
On Tuesday, February 20, 2018 12:16:03 PM CET George Cherian wrote:
> CPPC dirver is aware of multiple PCC subspace IDs. Enhance the debug
> and error messages in the driver to print the subspace id. In case of
> error it will be helpful to find which particular subspace is failing.
>
> Signed-off-by: George Cherian <george.cherian@cavium.com>
> ---
> drivers/acpi/cppc_acpi.c | 27 ++++++++++++++++-----------
> 1 file changed, 16 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
> index 06ea474..a4133d7 100644
> --- a/drivers/acpi/cppc_acpi.c
> +++ b/drivers/acpi/cppc_acpi.c
> @@ -227,7 +227,8 @@ static int check_pcc_chan(int pcc_ss_id, bool chk_err_bit)
> if (likely(!ret))
> pcc_ss_data->platform_owns_pcc = false;
> else
> - pr_err("PCC check channel failed. Status=%x\n", status);
> + pr_err("PCC check channel failed for ss: %d. Status=%x\n",
> + pcc_ss_id, status);
>
> return ret;
> }
> @@ -291,7 +292,8 @@ static int send_pcc_cmd(int pcc_ss_id, u16 cmd)
> time_delta = ktime_ms_delta(ktime_get(),
> pcc_ss_data->last_mpar_reset);
> if ((time_delta < 60 * MSEC_PER_SEC) && pcc_ss_data->last_mpar_reset) {
> - pr_debug("PCC cmd not sent due to MPAR limit");
> + pr_debug("PCC cmd for subspace %d not sent due to MPAR limit",
> + pcc_ss_id);
> ret = -EIO;
> goto end;
> }
> @@ -312,8 +314,8 @@ static int send_pcc_cmd(int pcc_ss_id, u16 cmd)
> /* Ring doorbell */
> ret = mbox_send_message(pcc_ss_data->pcc_channel, &cmd);
> if (ret < 0) {
> - pr_err("Err sending PCC mbox message. cmd:%d, ret:%d\n",
> - cmd, ret);
> + pr_err("Err sending PCC mbox message. ss: %d cmd:%d, ret:%d\n",
> + pcc_ss_id, cmd, ret);
> goto end;
> }
>
> @@ -553,7 +555,8 @@ static int register_pcc_channel(int pcc_ss_idx)
> pcc_mbox_request_channel(&cppc_mbox_cl, pcc_ss_idx);
>
> if (IS_ERR(pcc_data[pcc_ss_idx]->pcc_channel)) {
> - pr_err("Failed to find PCC communication channel\n");
> + pr_err("Failed to find PCC channel for subspace %d\n",
> + pcc_ss_idx);
> return -ENODEV;
> }
>
> @@ -566,7 +569,8 @@ static int register_pcc_channel(int pcc_ss_idx)
> cppc_ss = (pcc_data[pcc_ss_idx]->pcc_channel)->con_priv;
>
> if (!cppc_ss) {
> - pr_err("No PCC subspace found for CPPC\n");
> + pr_err("No PCC subspace found for %d CPPC\n",
> + pcc_ss_idx);
> return -ENODEV;
> }
>
> @@ -584,7 +588,8 @@ static int register_pcc_channel(int pcc_ss_idx)
> pcc_data[pcc_ss_idx]->pcc_comm_addr =
> acpi_os_ioremap(cppc_ss->base_address, cppc_ss->length);
> if (!pcc_data[pcc_ss_idx]->pcc_comm_addr) {
> - pr_err("Failed to ioremap PCC comm region mem\n");
> + pr_err("Failed to ioremap PCC comm region mem for %d\n",
> + pcc_ss_idx);
> return -ENOMEM;
> }
>
> @@ -973,8 +978,8 @@ static int cpc_read(int cpu, struct cpc_register_resource *reg_res, u64 *val)
> *val = readq_relaxed(vaddr);
> break;
> default:
> - pr_debug("Error: Cannot read %u bit width from PCC\n",
> - reg->bit_width);
> + pr_debug("Error: Cannot read %u bit width from PCC for ss: %d\n",
> + reg->bit_width, pcc_ss_id);
> ret_val = -EFAULT;
> }
>
> @@ -1012,8 +1017,8 @@ static int cpc_write(int cpu, struct cpc_register_resource *reg_res, u64 val)
> writeq_relaxed(val, vaddr);
> break;
> default:
> - pr_debug("Error: Cannot write %u bit width to PCC\n",
> - reg->bit_width);
> + pr_debug("Error: Cannot write %u bit width to PCC for ss: %d\n",
> + reg->bit_width, pcc_ss_id);
> ret_val = -EFAULT;
> break;
> }
>

Applied, thanks!


\
 
 \ /
  Last update: 2018-03-14 12:39    [W:0.038 / U:3.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site