lkml.org 
[lkml]   [2018]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] drm/sun4i: Handle DRM_BUS_FLAG_PIXDATA_*EDGE
On Tue, Mar 13, 2018 at 06:54:37PM +0100, Giulio Benetti wrote:
> Handle both positive and negative dclk polarity,
> according to bus_flags, taking care of this:
>
> On A20 and similar SoCs, the only way to achieve Positive Edge
> (Rising Edge), is setting dclk clock phase to 2/3(240°).
> By default TCON works in Negative Edge(Falling Edge), this is why phase
> is set to 0 in that case.
> Unfortunately there's no way to logically invert dclk through IO_POL
> register.
> The only acceptable way to work, triple checked with scope,
> is using clock phase set to 0° for Negative Edge and set to 240° for
> Positive Edge.
> On A33 and similar SoCs there would be a 90° phase option, but it divides
> also dclk by 2.
> This patch is a way to avoid quirks all around TCON and DOTCLOCK drivers
> for using A33 90° phase divided by 2 and consequently increase code
> complexity.
>
> Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>

Applied, thanks!
Maxime

--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-03-14 10:38    [W:0.041 / U:1.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site