lkml.org 
[lkml]   [2018]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/3] Add earlycon support for AMD Carrizo / Stoneyridge
Date
AMD Carrizo / Stoneyridge use a DesignWare 8250 UART that uses a 48 MHz
input clock. Currently, there is no way to tell earlycon to use a specific
uart input clock when configuring a baud rate.

Patch 1 adds an earlycon ->setup() callback to set up this clock. The setup is
triggered on the commandline by specifying "earlycon=amdcz,...".

Patch 2 adds an ACPI SPCR quirk to automatically trigger this hook when the
ACPI SPCR table OEMID field is "AMDCZ ".

Patch 3 adds an additional fix which allows botht the ACPI SPCR quirk and amdcz
->setup() to tell 8250_core to skip initialization of old serial ports that do
not exist on these SoCs.

Daniel Kurtz (3):
serial: 8250_early: Add earlycon support for AMD Carrizo / Stoneyridge
ACPI: SPCR: Add support for AMD CT/SZ
serial: core: Allow skipping old serial port initialization

drivers/acpi/spcr.c | 26 ++++++++++++++++++++++++++
drivers/tty/serial/8250/8250_core.c | 6 ++++++
drivers/tty/serial/8250/8250_early.c | 16 ++++++++++++++++
include/linux/serial_8250.h | 2 ++
4 files changed, 50 insertions(+)

--
2.16.2.804.g6dcf76e118-goog

\
 
 \ /
  Last update: 2018-03-15 03:05    [W:0.098 / U:8.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site