lkml.org 
[lkml]   [2018]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: virtio-gpu: Hang on shutdown after suspend/resume with virtio
From
Date


On 03/13/2018 01:41 PM, Christian Borntraeger wrote:
> Gerd,
>
> another thing with virtio-gpu.
>
> I can successfully do suspend/resume (echo disk > /sys/power/state) on my system. As soon as I have a
> virtio-gpu the system hangs on reboot/shutdown:
>
> e.g.
>
> crash> bt 1
> PID: 1 TASK: 6bef0000 CPU: 4 COMMAND: "systemd"
> #0 [6beef4c0] __schedule at a55d60
> #1 [6beef530] schedule at a563f2
> #2 [6beef548] virtio_gpu_queue_ctrl_buffer_locked at 7ea708
> #3 [6beef650] virtio_gpu_queue_ctrl_buffer at 7ea830
> #4 [6beef680] virtio_gpu_primary_plane_update at 7ed5ee
> #5 [6beef710] drm_atomic_helper_commit_planes at 7a2b46
> #6 [6beef760] vgdev_atomic_commit_tail at 7e9dbc
> #7 [6beef790] commit_tail at 7a7126
> #8 [6beef7c0] drm_atomic_helper_commit at 7a73fe
> #9 [6beef800] restore_fbdev_mode_atomic at 7aa38a
> #10 [6beef8a0] drm_fb_helper_pan_display at 7ab7aa
> #11 [6beef8f0] fb_pan_display at 74a248
> #12 [6beef928] bit_update_start at 7573c0
> #13 [6beef958] fbcon_switch at 7542b4
> #14 [6beefa50] redraw_screen at 77b2b8
> #15 [6beefaa0] csi_J at 77b476
> #16 [6beefad8] do_con_trol at 77ee12
> #17 [6beefb40] do_con_write at 77f80c
> #18 [6beefc10] con_write at 78003c
> #19 [6beefc40] n_tty_write at 7662d4
> #20 [6beefce0] tty_write at 761734
> #21 [6beefd48] __vfs_write at 3483cc
> #22 [6beefe00] vfs_write at 3486e8
> #23 [6beefe60] sys_write at 3489de
> #24 [6beefea8] system_call at a5b6a8
> PSW: 0705100180000000 000003ff8111251c (user space)
> GPRS: 0000000000000000 000003ff00000002 000000000000000e 000003ff80deaef0
> 000000000000000a 0000000000000000 000000000000000f 00000000000003ef
> 0000000000000000 000000000000000e 000003ff80deaef0 000000000000000a
> 000003ff81228f58 000000000000000e 000003ff81112510 000003fffdefedf8
>
>
>
>
> Turns out that the virtio-gpu console (via vnc) prints the image loading but then
> stops and show no login prompt. (but agetty is running on tty1) So I assume it
> already hangs after resume (and I am working on the serial sclp console).
>
> Does suspend resume works for you with virtio-gpu on x86? If yes, then I would
> not to look into the s390 code (virtio-blk and net seems to work fine). Otherwise
now
> it would be good if you could have a look.

I just checked. It seems that virtio-gpu has no freeze/restore callbacks. Is there
some work planned to implement the power callbacks for virtio-gpu?


\
 
 \ /
  Last update: 2018-03-13 14:32    [W:0.055 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site