lkml.org 
[lkml]   [2018]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] clk: clk-gpio: Allow GPIO to sleep in set/get_parent
Date
When changing or retrieving clock parents, the caller is in a sleepable
state (like prepare) so the GPIO operation need not be atomic. Replace
gpiod_{g|s}et_value with gpiod_{g|s}et_value_cansleep in the {g|s}et_parent
calls for the GPIO based clock mux.

This fixes a "slowpath" warning when the GPIO controller is an I2C expander
or something similar.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
---
drivers/clk/clk-gpio.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/clk-gpio.c b/drivers/clk/clk-gpio.c
index 151513c..40af4fb 100644
--- a/drivers/clk/clk-gpio.c
+++ b/drivers/clk/clk-gpio.c
@@ -73,14 +73,14 @@ static u8 clk_gpio_mux_get_parent(struct clk_hw *hw)
{
struct clk_gpio *clk = to_clk_gpio(hw);

- return gpiod_get_value(clk->gpiod);
+ return gpiod_get_value_cansleep(clk->gpiod);
}

static int clk_gpio_mux_set_parent(struct clk_hw *hw, u8 index)
{
struct clk_gpio *clk = to_clk_gpio(hw);

- gpiod_set_value(clk->gpiod, index);
+ gpiod_set_value_cansleep(clk->gpiod, index);

return 0;
}
--
1.9.1
\
 
 \ /
  Last update: 2018-03-13 09:54    [W:0.038 / U:1.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site