lkml.org 
[lkml]   [2018]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 0/4] perf annotate: Create a new '--tui-dump' option
From
Date


On 3/13/2018 11:20 PM, Arnaldo Carvalho de Melo wrote:
> Em Tue, Mar 13, 2018 at 10:16:50PM +0800, Jin Yao escreveu:
>> There is a requirement to let perf annotate support displaying the IPC/Cycle.
>> In previous patch, this is supported in TUI mode. While it's not convenient
>> for users since they have to take screen shots and copy/paste data.
>>
>> This patch series introduces a new option '--tui-dump' in perf annotate to
>> dump the TUI output to stdio.
>>
>> User can easily use the command line like:
>> 'perf annotate --tui-dump > /tmp/log.txt'
>
> My first impression is that this pollutes the code with way too many
> ifs, I was thinking more of a:
>
> while (read parsed objdump line) {
> ins__fprintf();
> }
>

Yes, the issue in my patch is that it uses many 'if' to check if it's
tui_dump(or called 'stdio2') or tui mode.

> Going from the refresh routine, I started doing the conversion, but haven't
> completed it, there are opportunities for more __scnprintf like routines, also
> one to find the percent_max, etc then those would be used both in these two for
> --stdio2, that eventually would become --stdio with the old one becoming
> --stdio1, till we're satisfied with the new default.
>

I have some questions for the following code. Please correct me if I
misunderstand anything.

> static void annotation_line__fprintf(struct annotate_line *al, FILE *fp)
> {
> struct browser_line *bl = browser_line(al);
> int i;
> double percent_max = 0.0;
> char bf[256];
>
> for (i = 0; i < browser->nr_events; i++) {
> if (al->samples[i].percent > percent_max)
> percent_max = al->samples[i].percent;
> }
>
> /* the following if/else block should be transformed into a __scnprintf routine
> that formats a buffer and then the TUI and --stdio2 use it */
>
> if (al->offset != -1 && percent_max != 0.0) {
> for (i = 0; i < ab->nr_events; i++) {
> if (annotate_browser__opts.show_total_period) {
> fprintf(fp, browser, "%11" PRIu64 " ", al->samples[i].he.period);
> } else if (annotate_browser__opts.show_nr_samples) {
> fprintf(fp, browser, "%6" PRIu64 " ", al->samples[i].he.nr_samples);
> } else {
> fprintf(fp, "%6.2f ", al->samples[i].percent);
> }
> }
> } else {
> ui_browser__printf(browser, "%*s", pcnt_width,
> annotate_browser__opts.show_total_period ? "Period" :
> annotate_browser__opts.show_nr_samples ? "Samples" : "Percent");
>
> }
>

I guess the above code has not been completed yet. My understanding for
Arnaldo's idea is that the output should be written to a buffer via
scnprintf and the buffer will be passed to TUI or stdio2 and printed out
later.

One potential issue is how to process the color for TUI? For example,
the call to ui_browser__set_percent_color. If we need to set color for
TUI, it looks we still have to check if it's a TUI mode.

For example,

Suppose the bf[] has been written with the Percent string yet, next we need,

if (--tui) {
ui_browser__set_percent_color(...);
ui_browser__printf(bf, ...);
} else {
printf(..., bf);
}

Is my understanding correct?

> /* The ab->have_cycles should go to a separate struct, outside
> * annotation_browser, and the rest should go to something that just does scnprintf on a buffer
> * that then is printed on the TUI or with fprintf */
>
> if (ab->have_cycles) {
> if (al->ipc)
> fprintf(fp, "%*.2f ", IPC_WIDTH - 1, al->ipc) > else if (show_title)
> ui_browser__printf(browser, "%*s ", IPC_WIDTH - 1, "IPC");
>
> if (al->cycles)
> ui_browser__printf(browser, "%*" PRIu64 " ",
> CYCLES_WIDTH - 1, al->cycles);
> else if (!show_title)
> ui_browser__write_nstring(browser, " ", CYCLES_WIDTH);
> else
> ui_browser__printf(browser, "%*s ", CYCLES_WIDTH - 1, "Cycle");
> }
>
> SLsmg_write_char(' ');
>
> /* The scroll bar isn't being used */
> if (!browser->navkeypressed)
> width += 1;
>
> if (!*al->line)
> fprintf(fp, "\n");
> else if (al->offset == -1) {
> if (al->line_nr && annotate_browser__opts.show_linenr)
> printed = scnprintf(bf, sizeof(bf), "%-*d ",
> ab->addr_width + 1, al->line_nr);
> else
> printed = scnprintf(bf, sizeof(bf), "%*s ",
> ab->addr_width, " ");
> fprintf(fp, bf);
> ui_browser__write_nstring(browser, al->line, width - printed - pcnt_width - cycles_width + 1);
> } else {
> u64 addr = al->offset;
> int color = -1;
>
> if (!annotate_browser__opts.use_offset)
> addr += ab->start;
>
> if (!annotate_browser__opts.use_offset) {
> printed = scnprintf(bf, sizeof(bf), "%" PRIx64 ": ", addr);
> } else {
> if (bl->jump_sources) {
> if (annotate_browser__opts.show_nr_jumps) {
> int prev;
> printed = scnprintf(bf, sizeof(bf), "%*d ",
> ab->jumps_width,
> bl->jump_sources);
> prev = annotate_browser__set_jumps_percent_color(ab, bl->jump_sources,
> current_entry);
> ui_browser__write_nstring(browser, bf, printed);
> ui_browser__set_color(browser, prev);
> }
>

JUMP is another headache case. For TUI, we need to set color and write
jump arrow. While for stdio2, we don't need that. So looks we also need
to check if it's in TUI mode.

> printed = scnprintf(bf, sizeof(bf), "%*" PRIx64 ": ",
> ab->target_width, addr);
> } else {
> printed = scnprintf(bf, sizeof(bf), "%*s ",
> ab->addr_width, " ");
> }
> }
>
> fprintf(fp, bf);
>
> disasm_line__write(disasm_line(al), browser, bf, sizeof(bf));
>
> ui_browser__write_nstring(browser, bf, width - pcnt_width - cycles_width - 3 - printed);
> }
> }
>
> unsigned int annotation_lines__fprintf(struct list_head *lines, FILE *fp)
> {
> struct list_head *line;
> struct annotation_line *al;
>
> list_for_each(line, lines) {
> struct annotation_line *al = list_entry(line, struct annotation_line, node);
> annotation_line__fprintf(al, line);
> }
>
> return row;
> }
>
> Then the main code would use the same code that creates the browser->b.entries
> and would pass it to annpotation_lines__fprintf().
>

Is the main code mentioned here symbol__tui_annotate()?

struct annotate_browser browser = {
.b = {
.refresh = annotate_browser__refresh,
.write = annotate_browser__write,
....
},
};

Remove the code line ".write = annotate_browser__write"? Don't need the
browser op (write/refresh)? Sorry, I'm not very clear about this idea.

> i.e. we would disentanble the formatting of strings and auxiliary routines to
> obtain the max_percent, i.e. nothing of TUI is needed for --stdio2, just the
> formatting of strings.
>
> - Arnaldo
>

Will Arnaldo post your patch? Or do I need to improve my patch and post
again?

Thanks
Jin Yao

>> For example:
>> $ perf annotate compute_flag --tui-dump
>>
>> Percent IPC Cycle
>>
>> Disassembly of section .text:
>>
>> 0000000000400640 <compute_flag>:
>> compute_flag():
>> volatile int count;
>> static unsigned int s_randseed;
>>
>> __attribute__((noinline))
>> int compute_flag()
>> {
>> 23.00 1.16 sub $0x8,%rsp
>> int i;
>>
>> i = rand() % 2;
>> 23.06 1.16 1 callq rand@plt
>>
>> return i;
>> 27.01 3.38 mov %eax,%edx
>> }
>> 3.38 add $0x8,%rsp
>> {
>> int i;
>>
>> i = rand() % 2;
>>
>> return i;
>> 3.38 shr $0x1f,%edx
>> 3.38 add %edx,%eax
>> 3.38 and $0x1,%eax
>> 3.38 sub %edx,%eax
>> }
>> 26.93 3.38 2 retq
>>
>> The '--stdio' option is still kept now. Maybe in future, we can only
>> maintain the TUI routines and drop the lagacy stdio code. But right
>> now we'd better keep it until the '--tui-dump' option is good enough.
>>
>> Jin Yao (4):
>> perf browser: Add a new 'dump' flag
>> perf browser: bypass ui_init if in tui dump mode
>> perf annotate: Process the new switch flag tui_dump
>> perf annotate: Enable the '--tui-dump' mode
>>
>> tools/perf/Documentation/perf-annotate.txt | 3 +++
>> tools/perf/builtin-annotate.c | 12 +++++++--
>> tools/perf/builtin-c2c.c | 2 +-
>> tools/perf/builtin-report.c | 2 +-
>> tools/perf/builtin-top.c | 2 +-
>> tools/perf/ui/browser.c | 38 +++++++++++++++++++++++----
>> tools/perf/ui/browser.h | 1 +
>> tools/perf/ui/browsers/annotate.c | 41 +++++++++++++++++++++---------
>> tools/perf/ui/browsers/hists.c | 2 +-
>> tools/perf/ui/setup.c | 9 +++++--
>> tools/perf/ui/ui.h | 2 +-
>> tools/perf/util/annotate.h | 6 +++--
>> tools/perf/util/hist.h | 11 +++++---
>> 13 files changed, 99 insertions(+), 32 deletions(-)
>>
>> --
>> 2.7.4

\
 
 \ /
  Last update: 2018-03-14 03:05    [W:0.209 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site