lkml.org 
[lkml]   [2018]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] media: vb2: unify calling of set_page_dirty_lock
From
Date
Le mercredi 18 octobre 2017 à 11:34 +0300, Stanimir Varbanov a écrit :
>
> On 10/17/2017 05:19 PM, Nicolas Dufresne wrote:
> > Le mardi 17 octobre 2017 à 13:14 +0300, Sakari Ailus a écrit :
> > > On Sun, Oct 15, 2017 at 07:09:24PM -0400, Nicolas Dufresne wrote:
> > > > Le dimanche 15 octobre 2017 à 23:40 +0300, Sakari Ailus a écrit
> > > > :
> > > > > Hi Nicolas,
> > > > >
> > > > > On Tue, Oct 10, 2017 at 11:40:10AM -0400, Nicolas Dufresne
> > > > > wrote:
> > > > > > Le mardi 29 août 2017 à 14:26 +0300, Stanimir Varbanov a
> > > > > > écrit :
> > > > > > > Currently videobuf2-dma-sg checks for dma direction for
> > > > > > > every single page and videobuf2-dc lacks any dma
> > > > > > > direction
> > > > > > > checks and calls set_page_dirty_lock unconditionally.
> > > > > > >
> > > > > > > Thus unify and align the invocations of
> > > > > > > set_page_dirty_lock
> > > > > > > for videobuf2-dc, videobuf2-sg memory allocators with
> > > > > > > videobuf2-vmalloc, i.e. the pattern used in vmalloc has
> > > > > > > been
> > > > > > > copied to dc and dma-sg.
> > > > > >
> > > > > > Just before we go too far in "doing like vmalloc", I would
> > > > > > like to
> > > > > > share this small video that display coherency issues when
> > > > > > rendering
> > > > > > vmalloc backed DMABuf over various KMS/DRM driver. I can
> > > > > > reproduce
> > > > > > this
> > > > > > easily with Intel and MSM display drivers using UVC or
> > > > > > Vivid as
> > > > > > source.
> > > > > >
> > > > > > The following is an HDMI capture of the following GStreamer
> > > > > > pipeline
> > > > > > running on Dragonboard 410c.
> > > > > >
> > > > > > gst-launch-1.0 -v v4l2src device=/dev/video2 ! video/x-
> > > > > > raw,format=NV16,width=1280,height=720 ! kmssink
> > > > > > https://people.collabora.com/~nicolas/vmalloc-issue.mov
> > > > > >
> > > > > > Feedback on this issue would be more then welcome. It's not
> > > > > > clear
> > > > > > to me
> > > > > > who's bug is this (v4l2, drm or iommu). The software is
> > > > > > unlikely to
> > > > > > be
> > > > > > blamed as this same pipeline works fine with non-vmalloc
> > > > > > based
> > > > > > sources.
> > > > >
> > > > > Could you elaborate this a little bit more? Which Intel CPU
> > > > > do you
> > > > > have
> > > > > there?
> > > >
> > > > I have tested with Skylake and Ivy Bridge and on Dragonboard
> > > > 410c
> > > > (Qualcomm APQ8016 SoC) (same visual artefact)
> > >
> > > I presume kmssink draws on the display. Which GPU did you use?
> >
> > In order, GPU will be Iris Pro 580, Intel® Ivybridge Mobile and an
> > Adreno (3x ?). Why does it matter ? I'm pretty sure the GPU is not
> > used
> > on the DB410c for this use case.
>
> Nicolas, for me this looks like a problem in v4l2. In the case of
> vivid
> the stats overlay (where the coherency issues are observed, and most
> probably the issue will be observed on the whole image but
> fortunately
> it is a static image pattern) are filled by the CPU but I cannot see
> where the cache is flushed. Also I'm wondering why .finish method is
> missing for dma-vmalloc mem_ops.
>
> To be sure that the problem is in vmalloc v4l2 allocator, could you
> change the allocator to dma-contig, there is a module param for that
> called 'allocators'.

I've looked into this again. I have hit the same issue but with CPU to
DRM, using DMABuf allocated from DRM Dumb buffers. In that case, using
DMA_BUF_IOCTL_SYNC fixes the issues.

This raises a lot of question around the model used in V4L2. As you
mention, prepare/finish are missing in dma-vmalloc mem_ops. I'll give a
try implementing that, it should cover my initial use case, but then I
believe it will fail if my pipeline is:

UVC -> in plane CPU modification -> DRM

Because we don't implement begin/end_cpu_access on our exported DMABuf.
It should also fail for the following use case:

UVC (importer) -> DRM

UVC driver won't call the remote dmabuf being/end_cpu_access method.
This one is difficult because UVC driver and vivid don't seem to be
aware of being an importer, exported or simply exporting to CPU
(through mmap). I believe what we have now pretty much assumes the what
we export as vmalloc is to be used by CPU only. Also, the usual
direction used by prepare/finish ops won't work for drivers like vivid
and UVC that write into the buffers using the cpu.

To be continued ...

Nicolas


\
 
 \ /
  Last update: 2018-03-14 01:44    [W:0.056 / U:0.736 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site