lkml.org 
[lkml]   [2018]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 1/1] dmaengine: stm32-dmamux: fix a potential buffer overflow
Date
The bitfield dma_inuse is allocated of size dma_requests bits, thus a
valid bit address is from 0 to (dma_requests - 1).
When find_first_zero_bit() fails, it returns dma_requests as invalid
address.
Using such address for the following set_bit() is incorrect and, if
dma_requests is a multiple of BITS_PER_LONG, it will cause a buffer
overflow.
Currently this driver is only used in DT stm32h743.dtsi where a safe value
dma_requests=16 is not triggering the buffer overflow.

Fixed by checking the return value of find_first_zero_bit() _before_
using it.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
---
Version history:
v1:
* Initial
---
---
drivers/dma/stm32-dmamux.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/dma/stm32-dmamux.c b/drivers/dma/stm32-dmamux.c
index 4dbb30c..b922db9 100644
--- a/drivers/dma/stm32-dmamux.c
+++ b/drivers/dma/stm32-dmamux.c
@@ -118,14 +118,15 @@ static void *stm32_dmamux_route_allocate(struct of_phandle_args *dma_spec,
spin_lock_irqsave(&dmamux->lock, flags);
mux->chan_id = find_first_zero_bit(dmamux->dma_inuse,
dmamux->dma_requests);
- set_bit(mux->chan_id, dmamux->dma_inuse);
- spin_unlock_irqrestore(&dmamux->lock, flags);

if (mux->chan_id == dmamux->dma_requests) {
+ spin_unlock_irqrestore(&dmamux->lock, flags);
dev_err(&pdev->dev, "Run out of free DMA requests\n");
ret = -ENOMEM;
- goto error;
+ goto error_chan_id;
}
+ set_bit(mux->chan_id, dmamux->dma_inuse);
+ spin_unlock_irqrestore(&dmamux->lock, flags);

/* Look for DMA Master */
for (i = 1, min = 0, max = dmamux->dma_reqs[i];
@@ -173,6 +174,8 @@ static void *stm32_dmamux_route_allocate(struct of_phandle_args *dma_spec,

error:
clear_bit(mux->chan_id, dmamux->dma_inuse);
+
+error_chan_id:
kfree(mux);
return ERR_PTR(ret);
}
--
2.7.4
\
 
 \ /
  Last update: 2018-03-13 17:56    [W:0.066 / U:0.840 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site