lkml.org 
[lkml]   [2018]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 6/8] gpio: 104-idi-48: Implement get_multiple callback
Date
The ACCES I/O 104-IDI-48 series of devices provides 48
optically-isolated inputs accessed via six 8-bit ports. Since eight
input lines are acquired on a single port input read, the 104-IDI-48
GPIO driver may improve multiple input reads by utilizing a get_multiple
callback. This patch implements the idi_48_gpio_get_multiple function
which serves as the respective get_multiple callback.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
drivers/gpio/gpio-104-idi-48.c | 41 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 41 insertions(+)

diff --git a/drivers/gpio/gpio-104-idi-48.c b/drivers/gpio/gpio-104-idi-48.c
index add859d59766..d82139c3117a 100644
--- a/drivers/gpio/gpio-104-idi-48.c
+++ b/drivers/gpio/gpio-104-idi-48.c
@@ -88,6 +88,46 @@ static int idi_48_gpio_get(struct gpio_chip *chip, unsigned offset)
return 0;
}

+static int idi_48_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
+ unsigned long *bits)
+{
+ struct idi_48_gpio *const idi48gpio = gpiochip_get_data(chip);
+ unsigned int i;
+ const unsigned int gpio_reg_size = 8;
+ unsigned int bit_word_offset;
+ unsigned int bits_mask;
+ const unsigned long reg_mask = GENMASK(gpio_reg_size, 0);
+ unsigned int port;
+ unsigned int in_port;
+ unsigned long port_state;
+
+ /* clear bits array to a clean slate */
+ for (i = 0; i < chip->ngpio; i += BITS_PER_LONG)
+ bits[i / BITS_PER_LONG] = 0;
+
+ /* get bits are evaluated a gpio register size at a time */
+ for (i = 0; i < chip->ngpio; i += gpio_reg_size) {
+ bit_word_offset = i % BITS_PER_LONG;
+ bits_mask = mask[BIT_WORD(i)] & (reg_mask << bit_word_offset);
+ if (!bits_mask) {
+ /* no get bits in this register so skip to next one */
+ continue;
+ }
+
+ /* compute input port offset */
+ port = i / gpio_reg_size;
+ in_port = (port > 2) ? port + 1 : port;
+
+ /* get input bits */
+ port_state = inb(idi48gpio->base + in_port);
+
+ /* store acquired bits */
+ bits[BIT_WORD(i)] |= port_state << bit_word_offset;
+ }
+
+ return 0;
+}
+
static void idi_48_irq_ack(struct irq_data *data)
{
}
@@ -256,6 +296,7 @@ static int idi_48_probe(struct device *dev, unsigned int id)
idi48gpio->chip.get_direction = idi_48_gpio_get_direction;
idi48gpio->chip.direction_input = idi_48_gpio_direction_input;
idi48gpio->chip.get = idi_48_gpio_get;
+ idi48gpio->chip.get_multiple = idi_48_gpio_get_multiple;
idi48gpio->base = base[id];

raw_spin_lock_init(&idi48gpio->lock);
--
2.16.2
\
 
 \ /
  Last update: 2018-03-12 21:51    [W:0.116 / U:1.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site