lkml.org 
[lkml]   [2018]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 14/14] Input: atmel_mxt_ts - remove platform data support
Date
Now that there are no users of custom Atmel platform data, and everyone
has switched to the generic device properties, we can remove support for
the platform data.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
MAINTAINERS | 1 -
drivers/input/touchscreen/atmel_mxt_ts.c | 125 +++++++++------------
include/linux/platform_data/atmel_mxt_ts.h | 31 -----
3 files changed, 50 insertions(+), 107 deletions(-)
delete mode 100644 include/linux/platform_data/atmel_mxt_ts.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 4623caf8d72d8..37b70874a4771 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2394,7 +2394,6 @@ T: git git://github.com/ndyer/linux.git
S: Maintained
F: Documentation/devicetree/bindings/input/atmel,maxtouch.txt
F: drivers/input/touchscreen/atmel_mxt_ts.c
-F: include/linux/platform_data/atmel_mxt_ts.h

ATMEL SAMA5D2 ADC DRIVER
M: Ludovic Desroches <ludovic.desroches@microchip.com>
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index cf2aac4e79ae8..642211254acc4 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -23,10 +23,10 @@
#include <linux/delay.h>
#include <linux/firmware.h>
#include <linux/i2c.h>
-#include <linux/platform_data/atmel_mxt_ts.h>
#include <linux/input/mt.h>
#include <linux/interrupt.h>
#include <linux/of.h>
+#include <linux/property.h>
#include <linux/slab.h>
#include <linux/gpio/consumer.h>
#include <linux/property.h>
@@ -274,7 +274,6 @@ struct mxt_data {
struct i2c_client *client;
struct input_dev *input_dev;
char phys[64]; /* device physical location */
- const struct mxt_platform_data *pdata;
struct mxt_object *object_table;
struct mxt_info info;
unsigned int irq;
@@ -325,6 +324,9 @@ struct mxt_data {

/* for config update handling */
struct completion crc_completion;
+
+ u32 *t19_keymap;
+ unsigned int t19_num_keys;
};

struct mxt_vb2_buffer {
@@ -743,15 +745,14 @@ static int mxt_write_object(struct mxt_data *data,
static void mxt_input_button(struct mxt_data *data, u8 *message)
{
struct input_dev *input = data->input_dev;
- const struct mxt_platform_data *pdata = data->pdata;
int i;

- for (i = 0; i < pdata->t19_num_keys; i++) {
- if (pdata->t19_keymap[i] == KEY_RESERVED)
+ for (i = 0; i < data->t19_num_keys; i++) {
+ if (data->t19_keymap[i] == KEY_RESERVED)
continue;

/* Active-low switch */
- input_report_key(input, pdata->t19_keymap[i],
+ input_report_key(input, data->t19_keymap[i],
!(message[1] & BIT(i)));
}
}
@@ -759,7 +760,7 @@ static void mxt_input_button(struct mxt_data *data, u8 *message)
static void mxt_input_sync(struct mxt_data *data)
{
input_mt_report_pointer_emulation(data->input_dev,
- data->pdata->t19_num_keys);
+ data->t19_num_keys);
input_sync(data->input_dev);
}

@@ -1859,7 +1860,6 @@ static void mxt_input_close(struct input_dev *dev);
static void mxt_set_up_as_touchpad(struct input_dev *input_dev,
struct mxt_data *data)
{
- const struct mxt_platform_data *pdata = data->pdata;
int i;

input_dev->name = "Atmel maXTouch Touchpad";
@@ -1873,15 +1873,14 @@ static void mxt_set_up_as_touchpad(struct input_dev *input_dev,
input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
MXT_PIXELS_PER_MM);

- for (i = 0; i < pdata->t19_num_keys; i++)
- if (pdata->t19_keymap[i] != KEY_RESERVED)
+ for (i = 0; i < data->t19_num_keys; i++)
+ if (data->t19_keymap[i] != KEY_RESERVED)
input_set_capability(input_dev, EV_KEY,
- pdata->t19_keymap[i]);
+ data->t19_keymap[i]);
}

static int mxt_initialize_input_device(struct mxt_data *data)
{
- const struct mxt_platform_data *pdata = data->pdata;
struct device *dev = &data->client->dev;
struct input_dev *input_dev;
int error;
@@ -1947,7 +1946,7 @@ static int mxt_initialize_input_device(struct mxt_data *data)
}

/* If device has buttons we assume it is a touchpad */
- if (pdata->t19_num_keys) {
+ if (data->t19_num_keys) {
mxt_set_up_as_touchpad(input_dev, data);
mt_flags |= INPUT_MT_POINTER;
} else {
@@ -2921,51 +2920,42 @@ static void mxt_input_close(struct input_dev *dev)
mxt_stop(data);
}

-static const struct mxt_platform_data *
-mxt_parse_device_properties(struct i2c_client *client)
+static int mxt_parse_device_properties(struct mxt_data *data)
{
static const char keymap_property[] = "linux,gpio-keymap";
- struct mxt_platform_data *pdata;
+ struct device *dev = &data->client->dev;
u32 *keymap;
int n_keys;
int error;

- pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
- if (!pdata)
- return ERR_PTR(-ENOMEM);
-
- if (device_property_present(&client->dev, keymap_property)) {
- n_keys = device_property_read_u32_array(&client->dev,
- keymap_property,
+ if (device_property_present(dev, keymap_property)) {
+ n_keys = device_property_read_u32_array(dev, keymap_property,
NULL, 0);
if (n_keys <= 0) {
error = n_keys < 0 ? n_keys : -EINVAL;
- dev_err(&client->dev,
- "invalid/malformed '%s' property: %d\n",
+ dev_err(dev, "invalid/malformed '%s' property: %d\n",
keymap_property, error);
- return ERR_PTR(error);
+ return error;
}

- keymap = devm_kmalloc_array(&client->dev, n_keys, sizeof(u32),
+ keymap = devm_kmalloc_array(dev, n_keys, sizeof(*keymap),
GFP_KERNEL);
if (!keymap)
- return ERR_PTR(-ENOMEM);
+ return -ENOMEM;

- error = device_property_read_u32_array(&client->dev,
- keymap_property,
+ error = device_property_read_u32_array(dev, keymap_property,
keymap, n_keys);
if (error) {
- dev_err(&client->dev,
- "failed to parse '%s' property: %d\n",
+ dev_err(dev, "failed to parse '%s' property: %d\n",
keymap_property, error);
- return ERR_PTR(error);
+ return error;
}

- pdata->t19_keymap = keymap;
- pdata->t19_num_keys = n_keys;
+ data->t19_keymap = keymap;
+ data->t19_num_keys = n_keys;
}

- return pdata;
+ return 0;
}

#ifdef CONFIG_ACPI
@@ -3048,25 +3038,12 @@ static const struct dmi_system_id mxt_dmi_table[] = {
{ }
};

-static int mxt_acpi_probe(struct i2c_client *client)
+static int mxt_prepare_acpi_properties(struct i2c_client *client)
{
struct acpi_device *adev;
const struct dmi_system_id *system_id;
const struct mxt_acpi_platform_data *acpi_pdata;

- /*
- * Ignore ACPI devices representing bootloader mode.
- *
- * This is a bit of a hack: Google Chromebook BIOS creates ACPI
- * devices for both application and bootloader modes, but we are
- * interested in application mode only (if device is in bootloader
- * mode we'll end up switching into application anyway). So far
- * application mode addresses were all above 0x40, so we'll use it
- * as a threshold.
- */
- if (client->addr < 0x40)
- return -ENXIO;
-
adev = ACPI_COMPANION(&client->dev);
if (!adev)
return -ENOENT;
@@ -3102,37 +3079,29 @@ static int mxt_acpi_probe(struct i2c_client *client)
return 0;
}
#else
-static int mxt_acpi_probe(struct i2c_client *client)
+static int mxt_prepare_acpi_properties(struct i2c_client *client)
{
return -ENOENT;
}
#endif

-static const struct mxt_platform_data *
-mxt_get_platform_data(struct i2c_client *client)
-{
- const struct mxt_platform_data *pdata;
-
- pdata = dev_get_platdata(&client->dev);
- if (pdata)
- return pdata;
-
- return mxt_parse_device_properties(client);
-}
-
static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
struct mxt_data *data;
- const struct mxt_platform_data *pdata;
int error;

- error = mxt_acpi_probe(client);
- if (error && error != -ENOENT)
- return error;
-
- pdata = mxt_get_platform_data(client);
- if (IS_ERR(pdata))
- return PTR_ERR(pdata);
+ /*
+ * Ignore ACPI devices representing bootloader mode.
+ *
+ * This is a bit of a hack: Google Chromebook BIOS creates ACPI
+ * devices for both application and bootloader modes, but we are
+ * interested in application mode only (if device is in bootloader
+ * mode we'll end up switching into application anyway). So far
+ * application mode addresses were all above 0x40, so we'll use it
+ * as a threshold.
+ */
+ if (ACPI_COMPANION(&client->dev) && client->addr < 0x40)
+ return -ENXIO;

data = devm_kzalloc(&client->dev, sizeof(struct mxt_data), GFP_KERNEL);
if (!data)
@@ -3142,7 +3111,6 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
client->adapter->nr, client->addr);

data->client = client;
- data->pdata = pdata;
data->irq = client->irq;
i2c_set_clientdata(client, data);

@@ -3150,6 +3118,14 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
init_completion(&data->reset_completion);
init_completion(&data->crc_completion);

+ error = mxt_prepare_acpi_properties(client);
+ if (error && error != -ENOENT)
+ return error;
+
+ error = mxt_parse_device_properties(data);
+ if (error)
+ return error;
+
data->reset_gpio = devm_gpiod_get_optional(&client->dev,
"reset", GPIOD_OUT_LOW);
if (IS_ERR(data->reset_gpio)) {
@@ -3159,8 +3135,7 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
}

error = devm_request_threaded_irq(&client->dev, client->irq,
- NULL, mxt_interrupt,
- pdata->irqflags | IRQF_ONESHOT,
+ NULL, mxt_interrupt, IRQF_ONESHOT,
client->name, data);
if (error) {
dev_err(&client->dev, "Failed to register interrupt\n");
@@ -3280,7 +3255,7 @@ MODULE_DEVICE_TABLE(i2c, mxt_id);
static struct i2c_driver mxt_driver = {
.driver = {
.name = "atmel_mxt_ts",
- .of_match_table = of_match_ptr(mxt_of_match),
+ .of_match_table = mxt_of_match,
.acpi_match_table = ACPI_PTR(mxt_acpi_id),
.pm = &mxt_pm_ops,
},
diff --git a/include/linux/platform_data/atmel_mxt_ts.h b/include/linux/platform_data/atmel_mxt_ts.h
deleted file mode 100644
index 695035a8d7fb9..0000000000000
--- a/include/linux/platform_data/atmel_mxt_ts.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Atmel maXTouch Touchscreen driver
- *
- * Copyright (C) 2010 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __LINUX_PLATFORM_DATA_ATMEL_MXT_TS_H
-#define __LINUX_PLATFORM_DATA_ATMEL_MXT_TS_H
-
-#include <linux/types.h>
-
-enum mxt_suspend_mode {
- MXT_SUSPEND_DEEP_SLEEP = 0,
- MXT_SUSPEND_T9_CTRL = 1,
-};
-
-/* The platform data for the Atmel maXTouch touchscreen driver */
-struct mxt_platform_data {
- unsigned long irqflags;
- u8 t19_num_keys;
- const unsigned int *t19_keymap;
- enum mxt_suspend_mode suspend_mode;
-};
-
-#endif /* __LINUX_PLATFORM_DATA_ATMEL_MXT_TS_H */
--
2.16.2.660.g709887971b-goog
\
 
 \ /
  Last update: 2018-03-12 20:11    [W:0.199 / U:1.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site