lkml.org 
[lkml]   [2018]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subjectarm64: allwinner: Add support for TERES I laptop
Date
This series adds support for the TERES I open hardware laptop produced
by olimex. With these patches and a bootloader capable of setting up
simple framebuffer the laptop is quite useable.

Patches 1-4 add some pin descriptions and devices in the A64 dtsi, which
are useful to have on the teres.
Patch 5 finally adds the board dts itself.

best regards,
Harald

Harald Geyer (5):
arm64: dts: allwinner: a64: Add i2c0 pins
arm64: dts: allwinner: a64: Add watchdog
arm64: dts: allwinner: a64: add simplefb for A64 SoC
arm64: dts: allwinner: a64: Add pwm device
arm64: allwinner: a64: Add support for TERES I laptop

arch/arm64/boot/dts/allwinner/Makefile | 1 +
.../boot/dts/allwinner/sun50i-a64-teres-i.dts | 308 +++++++++++++++++++++
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 44 +++
3 files changed, 353 insertions(+)
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts

--
2.11.0

\
 
 \ /
  Last update: 2018-03-12 17:11    [W:0.160 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site