lkml.org 
[lkml]   [2018]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 07/10] ARM: dts: gemini: Remove "cooling-{min|max}-level" for gpio-fan node
On 09-02-18, 14:28, Viresh Kumar wrote:
> The "cooling-min-level" and "cooling-max-level" properties are not
> parsed by any part of the kernel currently and the max cooling state of
> gpio-fan cooling device is found by referring to the
> "gpio-fan,speed-map" instead.
>
> Remove the unused properties from the gpio-fan node.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
> arch/arm/boot/dts/gemini-dlink-dns-313.dts | 2 --
> 1 file changed, 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
> index 08568ce24d06..727d16eb02d9 100644
> --- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts
> +++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
> @@ -78,8 +78,6 @@
> gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>,
> <&gpio0 12 GPIO_ACTIVE_HIGH>;
> gpio-fan,speed-map = <0 0>, <3000 1>, <6000 2>;
> - cooling-min-level = <0>;
> - cooling-max-level = <2>;
> #cooling-cells = <2>;
> };
>

@Linus: Can you please pick this one for 4.17 ?

--
viresh

\
 
 \ /
  Last update: 2018-03-12 05:36    [W:0.560 / U:0.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site