lkml.org 
[lkml]   [2018]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 3/4] HID: steam: command to check wireless connection
Date
The wireless adaptor does not tell if a device is already connected when
steam_probe() is run.
Use a command to request the connection status.

Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
---
drivers/hid/hid-steam.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)

diff --git a/drivers/hid/hid-steam.c b/drivers/hid/hid-steam.c
index 03eebc4c28ba..3d34716ae55f 100644
--- a/drivers/hid/hid-steam.c
+++ b/drivers/hid/hid-steam.c
@@ -118,6 +118,11 @@ static int steam_send_report(struct steam_device *steam,
return ret;
}

+static inline int steam_send_report_byte(struct steam_device *steam, u8 cmd)
+{
+ return steam_send_report(steam, &cmd, 1);
+}
+
static int steam_get_serial(struct steam_device *steam)
{
/*
@@ -139,6 +144,16 @@ static int steam_get_serial(struct steam_device *steam)
return 0;
}

+/*
+ * This command requests the wireless adaptor to post an event
+ * with the connection status. Useful if this driver is loaded when
+ * the controller is already connected.
+ */
+static inline int steam_request_conn_status(struct steam_device *steam)
+{
+ return steam_send_report_byte(steam, 0xb4);
+}
+
static int steam_input_open(struct input_dev *dev)
{
struct steam_device *steam = input_get_drvdata(dev);
@@ -360,6 +375,7 @@ static int steam_probe(struct hid_device *hdev,
goto hid_hw_open_fail;
}
hid_info(hdev, "Steam wireless receiver connected");
+ steam_request_conn_status(steam);
} else {
ret = steam_register(steam);
if (ret) {
--
2.16.2
\
 
 \ /
  Last update: 2018-03-11 21:00    [W:0.117 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site