lkml.org 
[lkml]   [2018]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V5 2/2] thermal: imx: add i.MX7 thermal sensor support
On Thu, Mar 01, 2018 at 07:09:40AM +0800, Anson Huang wrote:
> This patch adds i.MX7 thermal sensor support, most
> of the i.MX7 thermal sensor functions are same with
> i.MX6 except the registers offset/layout, so we move
> those registers offset/layout definitions to soc data
> structure.
>
> i.MX7 uses single calibration data @25C, the calibration
> data is located at OCOTP offset 0x4F0, bit[17:9], the
> formula is as below:
>
> Tmeas = (Nmeas - n1) + 25; n1 is the fuse value for 25C.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> Signed-off-by: Bai Ping <ping.bai@nxp.com>
> Acked-by: Dong Aisheng <aisheng.dong@nxp.com>
> Acked-by: Shawn Guo <shawnguo@kernel.org>
> ---
> changes since V4:
> drop direct OCOTP register access for i.mx7d since it is a new added platform,
> only support reading ocotp values through the ocotp nvmem driver which handles clock.
> .../devicetree/bindings/thermal/imx-thermal.txt | 9 +-
> drivers/thermal/imx_thermal.c | 295 ++++++++++++++++-----
> 2 files changed, 239 insertions(+), 65 deletions(-)

Please add ack/reviewed-by's when posting new versions.

Rob

\
 
 \ /
  Last update: 2018-03-01 22:23    [W:0.056 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site