lkml.org 
[lkml]   [2018]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/2] dt-bindings: pinctrl: artpec6: add smaller groups for uarts
On Thu, Feb 22, 2018 at 4:22 PM, Niklas Cassel <niklas.cassel@axis.com> wrote:

> Add group configuration for uarts that are cut down
> variants, the standard being full, i.e. all signals,
> flow control, i.e. rx/tx and cts/rts, and rx/tx only.
>
> This allows us to be more precise in which pins we're
> actually using.
>
> Unfortunately the existing naming scheme leaves things
> to be desired, e.g. uart3grp0 means RX/TX and CTS/RTS,
> yet uart0grp0 means all pins.
> Since the exising suffixes have different meaning for
> different uarts, and the fact that we cannot change
> the name of existing groups, makes it hard to use a
> descriptive name for the newly added groups.
>
> Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>

Patch applied.

Yours,
Linus Walleij

\
 
 \ /
  Last update: 2018-03-01 21:59    [W:0.430 / U:0.472 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site