lkml.org 
[lkml]   [2018]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 11/13] remoteproc: create vdev subdevice with specific dma memory pool
Date
This patch creates a dedicated vdev subdevice for each vdev declared
in firmware resource table and associates carveout named "vdev%dbuffer"
(with %d vdev index in resource table) if any as dma coherent memory pool.

Then vdev subdevice is used as parent for virtio device.

Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
---
drivers/remoteproc/remoteproc_core.c | 40 ++++++++++++++++++++++++++++++++++
drivers/remoteproc/remoteproc_virtio.c | 2 +-
include/linux/remoteproc.h | 1 +
3 files changed, 42 insertions(+), 1 deletion(-)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 3041772..61c9927 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -427,8 +427,10 @@ static int rproc_handle_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc,
{
struct device *dev = &rproc->dev;
struct rproc_vdev *rvdev;
+ struct rproc_mem_entry *carveout;
int i, ret;
static int index;
+ char name[16];

/* make sure resource isn't truncated */
if (sizeof(*rsc) + rsc->num_of_vrings * sizeof(struct fw_rsc_vdev_vring)
@@ -479,6 +481,41 @@ static int rproc_handle_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc,
goto unwind_vring_allocations;
}

+ /* Initialise vdev subdevice */
+ snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index);
+ rvdev->dev.parent = rproc->dev.parent;
+ dev_set_name(&rvdev->dev, "%s#%s", dev_name(rvdev->dev.parent), name);
+ dev_set_drvdata(&rvdev->dev, rvdev);
+ dma_set_coherent_mask(&rvdev->dev, DMA_BIT_MASK(32));
+
+ ret = device_register(&rvdev->dev);
+ if (ret)
+ goto unwind_vring_allocations;
+
+ /* Try to find dedicated vdev buffer carveout */
+ carveout = rproc_find_carveout_by_name(rproc, name);
+
+ if (carveout) {
+ phys_addr_t pa;
+
+ if (carveout->va) {
+ dev_warn(dev, "vdev %d buffer carveout already mapped\n",
+ rvdev->index);
+ pa = rproc_va_to_pa(carveout->va);
+ } else {
+ /* Use dma address as carveout no memmapped yet */
+ pa = (phys_addr_t)carveout->dma;
+ }
+
+ /* Associate vdev buffer memory pool to vdev subdevice */
+ ret = dmam_declare_coherent_memory(&rvdev->dev, pa,
+ carveout->da,
+ carveout->len,
+ DMA_MEMORY_EXCLUSIVE);
+ if (ret < 0)
+ goto unregister_device;
+ }
+
list_add_tail(&rvdev->node, &rproc->rvdevs);

rproc_add_subdev(rproc, &rvdev->subdev,
@@ -486,6 +523,9 @@ static int rproc_handle_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc,

return 0;

+unregister_device:
+ put_device(&rvdev->dev);
+
unwind_vring_allocations:
for (i--; i >= 0; i--)
rproc_free_vring(&rvdev->vring[i]);
diff --git a/drivers/remoteproc/remoteproc_virtio.c b/drivers/remoteproc/remoteproc_virtio.c
index b0633fd..f80014f 100644
--- a/drivers/remoteproc/remoteproc_virtio.c
+++ b/drivers/remoteproc/remoteproc_virtio.c
@@ -303,7 +303,7 @@ static void rproc_virtio_dev_release(struct device *dev)
int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id)
{
struct rproc *rproc = rvdev->rproc;
- struct device *dev = &rproc->dev;
+ struct device *dev = &rvdev->dev;
struct virtio_device *vdev = &rvdev->vdev;
int ret;

diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index 0c9d0f6..dfc44af7 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -518,6 +518,7 @@ struct rproc_vdev {
struct kref refcount;

struct rproc_subdev subdev;
+ struct device dev;

unsigned int id;
unsigned int index;
--
1.9.1
\
 
 \ /
  Last update: 2018-03-01 17:25    [W:0.199 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site