lkml.org 
[lkml]   [2018]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] dt-bindings: stm32: Add bindings for Extended TrustZone Protection
Date
Extended TrustZone Protection driver is very basic and only needs
to know where are the registers (no clock, no interrupt)

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
---
.../bindings/arm/stm32/st,stm32mp1-etzpc.txt | 25 ++++++++++++++++++++++
1 file changed, 25 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/stm32/st,stm32mp1-etzpc.txt

diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32mp1-etzpc.txt b/Documentation/devicetree/bindings/arm/stm32/st,stm32mp1-etzpc.txt
new file mode 100644
index 000000000000..9407e37f7d15
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32mp1-etzpc.txt
@@ -0,0 +1,25 @@
+STMicroelectronics STM32 Extended TrustZone Protection driver
+
+Required properties:
+ - compatible : value should be "st,stm32mp1-etzpc"
+ - reg : physical base address of the IP registers and length of memory
+ mapped region.
+ - protected-devices: list of phandle of devices protected by etzpc.
+ Because etzpc driver rely on the phandle index in
+ the list, holes must be filled with a disabled node.
+
+Example for stm32mp1:
+
+reserved: disabled_node {
+ status = "disabled";
+};
+
+etzpc: etzpc@5c007000 {
+ compatible = "st,stm32mp1-etzpc";
+ reg = <0x5c007000 0x400>;
+ protected-devices = <&usart1>,
+ <&spi6>,
+ <&i2c4>,
+ <&reserved>,
+ <&rng1>;
+};
--
2.15.0
\
 
 \ /
  Last update: 2018-03-01 14:59    [W:0.043 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site